XPSATR1153P Schneider Electric – Preventa XPSATR Safety Module, Emergency Stop & Protective Guard, 24 V DC, 3 s Time Delay
The Schneider Electric XPSATR1153P is a Preventa safety relay module for monitoring emergency stops and protective guards. It provides both instantaneous and time-delayed safety outputs, which lets a machine perform a controlled stop: the instantaneous contacts cut the control signals immediately, and the delayed contacts drop out after a set time of up to 3 s. The module runs on 24 V DC and uses removable screw-clamp terminal blocks.
Safety Functions and Performance Level
- Functions: emergency stop monitoring (1-channel or 2-channel wiring) and protective guard monitoring
- Instantaneous safety outputs: up to PL e / Category 4 (EN/ISO 13849-1)
- Time-delayed safety outputs: up to SILCL 3 (EN/IEC 62061)
- Reliability data: MTTFd = 85 years; PFHd = 2 × 10⁻⁹ 1/h; DC > 99%
- Start type: automatic or manual
- Synchronisation time between inputs: 1 s
- Response time on input opening: ≤ 20 ms
Outputs
| Output | Value |
|---|---|
| Instantaneous safety outputs | 3 NO relay, volt-free |
| Time-delayed safety outputs | 3 NO relay, volt-free |
| Additional circuit | 1 NC |
| Time delay range | 0.1–3 s |
| Breaking capacity | 3 A at 24 V (DC-13) |
| Output thermal current | 6 A |
| Conventional free-air thermal current [Ith] | 8 A |
| Recommended fuse | 6 A gG |
| Minimum switching | 10 mA / 17 V |
Supply and Electrical Data
- Rated supply voltage: 24 V DC (−15% / +10%)
- Power consumption: 2.8 W
- Input protection: internal, electronic
- Rated insulation voltage [Ui]: 300 V
- Rated impulse withstand voltage [Uimp]: 4 kV, overvoltage category III
Terminals, Mounting and Environment
The module has captive screw-clamp terminals on removable blocks, accepting 1 × 0.2 to 2.5 mm² solid or flexible conductors.
- Mounting: 35 mm DIN rail
- Diagnostics: 5 LEDs
- Weight: 0.33 kg
- Protection: IP20 (terminals), IP40 (enclosure)
- Operating temperature: −25 to 55 °C
Standards and Certifications
The module complies with EN/IEC 60947-5-1, EN 60204-1, EN/IEC 61496-1, EN 50156-1, EN 62061 and EN/ISO 13849-1, and is certified TÜV, UL and CSA.
Range Status and Successor
The Preventa XPSATR range has been discontinued by Schneider Electric, and the XPSUAT range is its designated successor. Atlantech Drives can quote the original XPSATR1153P, where available, as well as the current Schneider XPSUAT references.
Source the XPSATR1153P Schneider Electric from Atlantech Drives
Atlantech Drives sources genuine Schneider Electric XPSATR1153P safety modules for maintenance teams and machine builders who need this exact reference, and ships fast worldwide. Our senior commercial team will check availability and lead time and confirm the part number with you before you order. Request a quote today.
