Purchase now: Wittenstein NP025S-MF1-3-1E1-1S Gearhead
Purchase now: Atlantech Drives provides you the Wittenstein Alpha NP025S-MF1-3-1E1-1S. This is a specialized **High-Speed Planetary Gearbox** with a reduction **Ratio of 3:1**. A ratio of 3 is typically the lowest (fastest) standard ratio available in planetary gearing. It allows for the highest possible output speeds, making it the perfect solution for applications requiring rapid moves over long distances or high-speed rotary tables where cycle time is the primary constraint.
Technical Specifications and Ratio 3 Design
The NP025S-MF1-3 utilizes a unique sun-gear-to-planet-gear size relationship to achieve this low reduction. The **»-1E1″** interface ensures compatibility with standard servo motors. Because the reduction is low (only 3x), the reflected inertia to the motor is only reduced by a factor of 9 (3 squared). This means the motor must be sized carefully to handle the load inertia directly. The unit features the standard **Smooth Output Shaft (1S)** for precision coupling.
- Part Number: NP025S-MF1-3-1E1-1S.
- Type: High Speed Planetary Gearbox.
- Ratio: 3 (i=3).
- Size: 025.
- Input Interface: Code 1E1.
- Application: High speed automation.
- Efficiency: Very High (> 98%).
- Running Noise: Low.
Expert Tips: Motor Sizing for Ratio 3
Don’t ignore inertia. Expert Tip: Engineers often choose Ratio 3 for speed, but forget about inertia matching. Unlike a Ratio 10 gearbox which «hides» the load mass from the motor, a **Ratio 3** gearbox exposes the motor to 1/9th of the load inertia. If your load is heavy, your motor tuning might be unstable (overshoot/vibration). Ensure your Motor-to-Load Inertia ratio is within the acceptable range (typically < 10:1) when using this low-ratio gearbox.
Frequently Asked Questions (FAQs)
Q: Does a Ratio 3 gearbox run hotter?
A: Generally, yes. Because the output speed is higher for a given input, the seals and bearings see more travel distance per minute. Ensure good heat dissipation.
Q: Can I change the interface to 1G1?
A: No, you should buy the correct unit. The adapter plate is a precision component. Swapping it in the field risks misalignment.
Do you need more references from this brand? Explore our full catalog of Wittenstein here.
