Purchase now: Wenglor S23-10M Connection Cable
Purchase now: Atlantech Drives provides you the Wenglor S23-10M, a versatile and cost-effective 10-meter Connection Cable for industrial sensors. It features a 4-pin M12 Straight Connector (Female) on one end and flying leads on the other. This model is manufactured with a PVC (Polyvinyl Chloride) jacket, making it the ideal choice for fixed installations where the cable is routed through wire ducts or trays and is not subjected to constant movement or aggressive oils.
Technical Specifications for Fixed Automation
The S23-10M is designed to provide a reliable IP67 connection over long distances. With 10 meters of length, it eliminates the need for extension cords or junction boxes in large conveyor systems or packaging lines. The connector body is molded for strain relief, preventing wire breakage at the coupling nut. While PVC is not as flexible as PUR, it offers excellent general-purpose protection and meets the standard temperature requirements of -30°C to +80°C for static installation.
- Part Number: S23-10M.
- Connector: M12 Socket, 4-pin, Straight.
- Length: 10 Meters.
- Jacket Material: PVC (Plastic).
- Rated Voltage: 250 V AC/DC.
- Protection: IP67.
- Temp Range (Fixed): -30°C … +80°C.
- Wire Cross-section: 0.34 mm².
- Application: General automation, conveyors, assembly lines.
Expert Installation Advice: Voltage Drop
Running 24VDC over long distances? Expert Tip: At 10 meters, voltage drop can become a factor if the connected device draws high current (like a vision light or a heavy solenoid valve). For standard sensors (<50mA), this cable is perfect. However, if you are powering a high-load actuator at the end of this 10m cable, verify that the voltage at the device hasn't dropped below 22V, which could cause intermittent resets.
Frequently Asked Questions (FAQs)
Q: Can I use this in a drag chain?
A: It is not recommended. PVC cables can withstand some movement, but for continuous flexing (millions of cycles), you should upgrade to the S27 (PUR) series to prevent the jacket from cracking.
Q: Does it work with 3-pin sensors?
A: Yes, absolutely. A 4-pin M12 female connector works perfectly with a 3-pin M12 male sensor. The 4th wire (usually White) will simply be unused at the panel end.
Do you need more references from this brand? Explore our full catalog of Wenglor here.
