Purchase now: Wago 750-1515 High Density Output Module
Purchase now: Atlantech Drives provides you the Wago 750-1515, a high-density **8-Channel Digital Output Module** that revolutionizes control cabinet wiring. Standard 8-channel modules (like the 750-530) offer only 1 wire per channel, forcing you to use separate terminal blocks for the 0V return wires. The 750-1515 solves this by offering a **2-Conductor Connection** for ALL 8 channels directly on the 12mm wide module. This means you can wire 8 actuators (valves, relays, lamps) with both Signal (+) and Ground (-) directly to the I/O slice.
Technical Specifications and Push-in Technology
The 750-1515 uses **Push-in CAGE CLAMP®** technology with 16 connection points (connecting via a specialized high-density interface or direct wire insertion depending on version/connector). It delivers **24 V DC** at **0.5 A** per channel. The outputs are short-circuit protected. It is ideal for driving solenoid valves in pneumatic islands where space is premium and «Star» wiring of ground wires is required.
- Part Number: 750-1515.
- Channels: 8 Digital Outputs.
- Connection: 2-Wire (Signal + 0V) per channel.
- Tech: Push-in CAGE CLAMP® (Solid wires).
- Current: 0.5 A per channel.
- Width: 12 mm.
- Load Type: Resistive, Inductive, Lamp.
- Isolation: 500 V (System/Field).
Expert Tips: Wire Selection
High density means small holes. Expert Tip: To fit 16 wires into a 12mm module front, the 750-1515 uses smaller terminal openings. It is optimized for **solid conductors** or fine-stranded conductors with **ferrules**. The maximum wire cross-section is typically **0.75 mm²** (AWG 18) or even smaller depending on the ferrule. Do not attempt to force 1.5 mm² standard cabling into this module; it won’t fit. Use 0.5 mm² wiring for best results.
Frequently Asked Questions (FAQs)
Q: Does it have LED status indicators?
A: Yes, despite the high density, it features 8 green LEDs to indicate the switching status of each channel.
Q: Can I switch 2A loads?
A: No, this module is rated for **0.5 A** per channel. For higher currents (2A), use the 750-501 or 750-502 (2-channel modules).
Do you need more references from this brand? Explore our full catalog of Wago here.
