ifm SM6001 – Magnetic-Inductive Flow Meter in US Units, 0.03–6.6 gpm, DN 15 G 1/2, Analogue, Pulse and IO-Link
The ifm SM6001 (product designation SMR12GGXFRKG/US-100) is a compact magnetic-inductive flow meter from ifm electronic for conductive liquids, water and water-based media. It is configured for US customary units:
- Flow in gpm and gph
- Totalised volume in gallons
- Temperature in °F
It measures flow (0.03 – 6.6 gpm), consumption through a totaliser, and medium temperature. It has a 4-digit LED display, two configurable outputs and IO-Link.
SM6001 vs SM6000
The SM6001 shares its designation, DN 15 G 1/2 connection and measuring performance with the SM6000. The difference is the factory display units:
| SM6001 | SM6000 | |
|---|---|---|
| Flow units | gpm, gph | l/min, m³/h |
| Totaliser units | gal | l, m³ |
| Temperature | °F | °C |
| Measuring range | 0.03 – 6.6 gpm | 0.1 – 25 l/min |
This makes the SM6001 the natural choice for North American machines and for replacing an existing SM6001 without reconfiguring the display.
Accurate and Fast
- Accuracy: ±(0.8 % of measured value + 0.5 % of full scale)
- Repeatability: ±0.2 % of full scale
- Resolution: 0.01 gpm
- Response time: 0.15 s
There are no moving parts in the flow. For best accuracy, ifm specifies a straight inlet of 3 × DN and outlet of 1 × DN.
Outputs
| Output | Functions |
|---|---|
| OUT1 | Flow switching, totaliser pulse, preset counter, IO-Link |
| OUT2 | Flow or temperature switching, analogue 4–20 mA or 0–10 V for flow or temperature, or counter reset input |
Key Technical Data – ifm SM6001
- Manufacturer article: SM6001 – SMR12GGXFRKG/US-100
- Media: Conductive liquids, water, water-based media (≥ 20 µS/cm; viscosity < 70 mm²/s at 40 °C)
- Flow:
- Measuring range: 0.03 – 6.6 gpm (1.5 – 396 gph)
- Resolution: 0.01 gpm / 0.5 gph
- Temperature measurement:
- Range: -4 to +176 °F
- Resolution: 0.1 °F
- Accuracy: ±2.5 K
- Medium temperature: 14 to 158 °F (-10 to +70 °C)
- Pressure rating: 16 bar / 232 psi (MAWP for CRN applications 15.3 bar)
- Operating voltage: 18 – 30 V DC (SELV/PELV), reverse polarity protected
- Current consumption: 95 mA at 24 V
- Outputs:
- 2 × PNP/NPN switching outputs, 200 mA each
- Analogue 4 – 20 mA (max. 500 Ω) or 0 – 10 V (min. 2 kΩ), scalable
- Pulse output (0.01 – 30,000,000 gal per pulse)
- IO-Link:
- Revision 1.1, COM2 (38.4 kBaud)
- Smart Sensor Profile SSP 0
- Min. cycle time 5 ms; DeviceID 570
- Response time: 0.15 s (damping 0 – 5 s; delay 0 – 50 s programmable)
- Process connection: G 1/2 external thread, DN 15, flat seal (pipe connection via adapter)
- Wetted parts: Stainless steel 316L/1.4404, PEEK, FKM
- Display: 4-digit alphanumeric LED, 6 green unit LEDs (gpm, gph, gal, °F, ×10³, ×10⁶), 2 yellow switching LEDs
- Electrical connection: M12 connector, A-coded, 4 gold-plated contacts
- Housing: Ø 54 × 110 mm, approx. 546 g
- Protection rating: IP67
- Ambient temperature: 14 to 140 °F (-10 to +60 °C)
- MTTF: 160 years
Typical Applications
- Cooling water monitoring on US-built machine tools, welders, lasers and moulds
- Water consumption measurement in gallons
- Process water and dosing in water treatment
Buy ifm SM6001 from Atlantech Drives
- Genuine ifm electronic flow meter, covered by a 12-month warranty
- Fast worldwide shipping
- Senior commercial advice to choose between the US-unit SM6001 and metric SM6000
- Quick, no-obligation quotes. Get a quote today.
Related ifm Products
- ifm SI5010 Flow Monitor
- ifm SI5006 Flow Monitor
- ifm SI0558 Thermal Flow Monitor
- All ifm electronic products
