Purchase now: Siemens 6ES7326-2BF10-0AB0 Fail-Safe Digital Output
Purchase now: Atlantechdrives provides you the 6ES7326-2BF10-0AB0, an ultra-reliable, fail-safe digital output module (SM 326) engineered by Siemens for the SIMATIC S7-300 and ET 200M distributed I/O systems. In modern industrial manufacturing, personnel and machine safety cannot be compromised. This specific module is strictly designed for safety-critical applications, allowing your automation system to directly control hazardous actuators—such as emergency stop contactors, hydraulic press safety valves, and burner management systems—while complying with the most rigorous international safety standards. By utilizing the PROFIsafe protocol over PROFIBUS or PROFINET, the 6ES7326-2BF10-0AB0 ensures that any hardware failure or communication loss instantly forces the connected field devices into a predefined safe state.
Technical Specifications of the 6ES7326-2BF10-0AB0
The 6ES7326-2BF10-0AB0 provides 10 highly monitored digital output channels. It achieves top-tier safety ratings (up to SIL 3 and PL e) through internal hardware redundancy and continuous self-testing diagnostics.
- Part Number: 6ES7326-2BF10-0AB0
- Module Type: SM 326 F-DO (Fail-Safe Digital Output)
- Compatible Platform: SIMATIC S7-300 / ET 200M
- Number of Outputs: 10 Isolated solid-state outputs
- Load Voltage: 24V DC
- Output Current: 2.0 Amps per channel
- Switching Logic: P/M switching (Sourcing and Sinking)
- Safety Integrity Level: Up to SIL 3 according to IEC 61508
- Performance Level: Up to PL e according to EN ISO 13849-1
- Front Connector: Requires a 40-pin connector
Expert Installation Advice: P/M Switching for SIL 3
Achieving a SIL 3 safety rating requires more than just buying an F-module; the physical wiring is equally critical. Expert Tip: To meet SIL 3 / PL e requirements, the 6ES7326-2BF10-0AB0 utilizes a «P/M switching» methodology (also known as cross-circuit proof wiring). This means for every single output channel, the module simultaneously switches the positive 24V DC line (P-switch) and the negative 0V DC ground return line (M-switch). You must wire both the supply and the return of your safety contactor directly back to the specific channel terminals on the module’s 40-pin front connector. Do not tie the contactor’s negative terminal to a common cabinet ground. This isolated return path allows the module to pulse-test the line and detect any «short to ground» or «short to 24V» faults before the actuator is even energized.
Maintenance and Module Passivation
When working with Siemens F-systems, technicians must understand the concept of «Passivation.» If the 6ES7326-2BF10-0AB0 detects a wire break, a short circuit, or an internal discrepancy during its continuous background testing, it will instantly «passivate» the affected channel or the entire module. Passivation forces the outputs to 0V (safe state) and lights up the red SF (System Fault) LED. Maintenance Warning: Once a module is passivated and the physical wiring fault is repaired, the module will not automatically restart. You must trigger a «Reintegration» command via your safety PLC logic (typically using the ACK_REI instruction in S7 Distributed Safety or Safety Advanced) to restore power to the outputs.
Frequently Asked Questions (FAQs)
Q: Can I use this module with a standard, non-safety S7-300 CPU?
A: No. Fail-safe modules like the 6ES7326-2BF10-0AB0 must be controlled by a Fail-Safe CPU (e.g., CPU 315F-2 PN/DP) that supports the PROFIsafe profile. A standard CPU cannot process the safety telegrams.
Q: Does this module require special configuration software?
A: Yes. You must use the S7 Distributed Safety or STEP 7 Safety Advanced software add-on package within TIA Portal or SIMATIC Manager to assign the safety parameters and F-destination addresses to the module.
Do you need more references from this brand? Explore our full catalog of Siemens here.
