MSMF082L1V2 Panasonic MINAS A6 Servo Motor – 750 W, 200 V, Low Inertia, with Holding Brake
The Panasonic MSMF082L1V2 is a 750 W, 200 V low-inertia servo motor from the MINAS A6 family (MSMF series), with a built-in 24 V DC holding brake. The brake holds the shaft in position when power is removed. That makes this motor the right choice for vertical axes, Z-axes, lifts and any load that must not drop or drift at standstill. It has an 80 mm square flange, an oil seal, a key-way shaft with center tap and lead-wire outputs rated IP65. It delivers 2.39 N·m rated torque and up to 7.16 N·m peak, with a maximum speed of 6,000 r/min and a 23-bit absolute/incremental encoder.
Decoding MSMF082L1V2
- MSMF – MINAS A6 low-inertia motor series
- 08 – 750 W rated output
- 2 – 200 V voltage specification
- L – 23-bit absolute/incremental encoder
- V2 – with holding brake, with oil seal, key-way shaft with center tap, lead-wire type
Key Features
- 750 W, 200 V, low inertia for fast acceleration and short cycle times
- Built-in 24 V DC holding brake, 2.45 N·m static friction torque
- Oil seal for gearbox mounting or contaminated environments
- Key-way shaft with center tap
- Lead-wire motor and encoder outputs, IP65
- 23-bit encoder (8,388,608 pulses/rev)
- No limit on regenerative braking frequency, with or without the external resistor option
Technical Specifications – MSMF082L1V2
| Parameter | Value |
|---|---|
| Manufacturer | Panasonic |
| Part number | MSMF082L1V2 |
| Family / series | MINAS A6 / MSMF (low inertia) |
| Rated output | 750 W |
| Voltage specification | 200 V |
| Power supply capacity | 1.8 kVA |
| Rated current | 4.1 A rms (reference) |
| Max. current | 17.4 A 0-p (reference) |
| Rated torque | 2.39 N·m |
| Continuous stall torque | 2.39 N·m |
| Peak torque | 7.16 N·m |
| Rated / max. speed | 3,000 / 6,000 r/min |
| Rotor inertia | 1.06 × 10⁻⁴ kg·m² |
| Recommended inertia ratio | 20 times or less |
| Encoder | 23-bit absolute/incremental, 8,388,608 resolution |
| Flange size | 80 mm sq. |
| Shaft | Key-way, center tap |
| Oil seal | With |
| Lead-out | Lead wire (motor and encoder) |
| Protection | IP65 |
| Mass | 3.1 kg |
| Permissible load (operation) | Radial 392 N; thrust A/B 147 N |
| External regenerative resistor option | DV0P4283 |
Holding Brake Specifications
| Parameter | Value |
|---|---|
| Static friction torque | 2.45 N·m or more |
| Engaging time | 70 ms or less |
| Releasing time | 20 ms or less |
| Exciting voltage | 24 V DC ±1.2 V |
| Exciting current | 0.42 A DC |
| Releasing voltage | 1 V DC or more |
Panasonic specifies the brake as a holding brake that releases when energized. It is designed to hold the axis at standstill, not to stop a moving motor.
Compatible Panasonic MINAS A6 Drivers (C-Frame, Single/3-Phase 200 V)
- MCDLT35SF – A6SF multifunction type
- MCDLN35SE – A6SE position control type
- MCDLN35SG – A6SG RS485/RS232 communication type
- MCDLT35NF – A6NF RTEX network type (multi)
- MCDLN35NE – A6NE RTEX network type (basic)
Buy Panasonic MSMF082L1V2 from Atlantech Drives
Order the Panasonic MSMF082L1V2 MINAS A6 servo motor with fast worldwide shipping. Our commercial team can quote the motor alone or as a set with a matching C-frame A6 driver, with quick answers on price and lead time. Request your quote today.
