Get now IC693MDL752 GE Fanuc Series 90-30 32-Point Output Module
Get now IC693MDL752 to significantly upgrade the discrete output density of your industrial automation platform. The GE Fanuc IC693MDL752 is a highly efficient 32-Point Discrete Output Module manufactured specifically for the robust Series 90-30 Programmable Logic Controller (PLC) family. Designed to operate utilizing negative logic (sinking) characteristics, this module effortlessly interfaces with a wide array of TTL and 5 to 24 VDC field devices. Whether you are actuating pneumatic solenoid valves, driving low-power motor starters, or illuminating operator panel indicators, this module handles the load with uncompromising reliability. The 32 individual output points are meticulously arranged into four isolated groups of eight points each. This architectural grouping allows for shared common power within a group while maintaining electrical isolation from the other groups, providing exceptional wiring flexibility across different DC power sources. By integrating this genuine OEM GE Fanuc component into your machine control architecture, you drastically reduce the physical footprint required in the electrical cabinet while multiplying your automated capabilities.
Core Technical Specifications
- Part Number: IC693MDL752
- Manufacturer: GE Fanuc
- Product Series: Series 90-30 PLC
- Module Type: Discrete Output Module (Negative Logic / Sinking)
- Point Count: 32 outputs (4 isolated groups of 8 points)
- Operating Voltage: 5 VDC to 24 VDC nominal
- Maximum Load Current: 0.5 Amps per point (maximum 4.0 Amps per group)
- Connector Type: Front-mounted 40-pin Fujitsu connector (requires custom cable or breakout block)
Expert Installation and Wiring Advice
Unlike standard 8-point or 16-point modules that feature built-in terminal blocks, the high-density nature of the IC693MDL752 requires a specialized connection strategy. The front of the module is equipped with a high-density 40-pin connector. To wire this module to your field devices, it is highly recommended to use a pre-fabricated Fanuc cable assembly that breaks out to a DIN-rail mounted terminal block (such as a Weidmuller or Phoenix Contact interface block). When wiring a sinking (negative logic) module, you must remember that the module switches the negative side of the circuit. The positive leg of your 24 VDC power supply must be wired directly to one side of the load, and the module will connect the other side of the load to the DC common to complete the circuit. Ensure your power supplies are adequately sized to handle the inrush current of 32 simultaneous devices, and always install inductive flyback diodes across any DC solenoid coils to protect the module’s internal solid-state switching components from reverse voltage spikes.
Frequently Asked Questions (FAQs)
What does the ‘F’ LED on the front of the IC693MDL752 indicate? The ‘F’ (Fuse) LED illuminates if either of the two internal 5 Amp electronic fuses has tripped due to an overcurrent or short-circuit condition on the field wiring. These fuses protect the internal circuitry and must be reset by cycling power after clearing the external fault.
Can I use this module to switch AC voltages? No. The IC693MDL752 is strictly designed for DC voltage applications (5 to 24 VDC). Applying alternating current (AC) to this module will immediately and permanently destroy the solid-state transistors.
Is the IC693MDL752 hot-swappable in a Series 90-30 rack? No. The Series 90-30 backplane does not support hot-swapping. You must completely power down the PLC rack before inserting or removing this module to prevent catastrophic CPU parity errors or hardware damage.
Do you need more references from this brand? Explore our full catalog of GE Fanuc here.
