Get now A98L-0001-0518 GE Fanuc 44-Key Membrane Keypad
Get now A98L-0001-0518 to immediately restore full manual data input (MDI) capabilities and tactile responsiveness to your CNC operator panels. The GE Fanuc A98L-0001-0518 is a highly durable, 44-key industrial membrane keypad designed specifically for the rigorous environments of heavy machining. Serving as the primary human-machine interface for legacy Fanuc Series 0-M and 0-T control systems, this keypad allows operators to input tool offsets, modify G-code programs, and navigate diagnostic screens with absolute precision. Over time, standard factory exposure to synthetic coolants, metallic dust, and constant physical pressing degrades the internal carbon contacts of original keypads. By replacing your worn overlay with this genuine OEM component, you eliminate missed keystrokes and double-entries, drastically reducing setup times and preventing catastrophic machining errors caused by incorrect data input.
Core Technical Specifications
- Part Number: A98L-0001-0518
- Manufacturer: GE Fanuc
- Component Type: CNC MDI Membrane Keypad / Keyboard Overlay
- Key Configuration: 44 tactile response keys
- Material: Chemical-resistant, high-durability industrial polymer
- Connection: Integrated flat ribbon cable with precisely pitched contacts
- Protection Rating: Designed to seal against IP65 standard factory contaminants
Expert Installation Advice
Replacing the A98L-0001-0518 keypad is a delicate procedure that requires absolute cleanliness to ensure a proper seal. Before applying the new membrane, you must completely remove the old adhesive from the CNC’s metal or plastic backing plate. Use a plastic scraper and high-purity isopropyl alcohol to dissolve any remaining glue residue. If the surface is not completely stripped and degreased, the new keypad’s adhesive backing will fail prematurely, allowing cutting fluids to seep behind the membrane and short out the underlying printed circuit board (PCB). Furthermore, when inserting the flat ribbon cable into the ZIF (Zero Insertion Force) connector on the motherboard, ensure the locking collar is fully seated to prevent intermittent key failures due to machine vibration.
Frequently Asked Questions (FAQs)
Why are some keys on my Fanuc control panel not registering? If only specific rows or columns of keys are unresponsive, it typically indicates a micro-fracture in the membrane’s internal ribbon cable or worn carbon contacts under those specific buttons. Replacing the entire A98L-0001-0518 keypad is the only permanent industrial solution.
Can I replace this membrane keypad while the CNC is powered on? Absolutely not. You must completely power down the machine tool and follow proper lockout/tagout procedures before dismantling the operator panel to avoid short-circuiting the MDI control board.
Does this keypad include the underlying plastic keys? No, the A98L-0001-0518 is the protective outer membrane overlay with the integrated flexible circuit. It adheres over the physical plastic or rubber key actuators located on your machine’s panel.
Do you need more references from this brand? Explore our full catalog of GE Fanuc here.
