Purchase now: Bonfiglioli VF 30 F1 30 P63 B5 Worm Gearbox
Purchase now: Atlantechdrives provides you the VF 30 F1 30 P63 B5, a highly reliable and compact worm gear reducer engineered by Bonfiglioli. Belonging to the globally recognized VF series, this specific unit is the industry standard for lightweight, cost-effective power transmission. Designed with an aluminum die-cast housing, the VF 30 provides exceptional heat dissipation and resistance to corrosion, making it perfect for packaging machinery, food processing conveyors, and automated gate systems. This exact configuration features a 30:1 reduction ratio, an F1 output flange, and is pre-configured to accept a standard IEC P63 motor with a B5 mounting flange. By converting high-speed motor rotation into high-torque output at a 90-degree angle, the VF 30 is the ultimate space-saving solution for modern machine builders.
Technical Specifications of the VF 30 F1 30 P63 B5
The VF 30 relies on a bronze worm wheel and a hardened steel worm shaft, an architectural pairing that provides exceptionally smooth and quiet operation under varying load conditions.
- Part Number: VF 30 F1 30 P63 B5
- Gearbox Series: VF (Worm Gear Reducer)
- Frame Size: 30 (Compact aluminum housing)
- Output Configuration: F1 (Flange mounted)
- Reduction Ratio (i): 30:1
- Motor Interface: IEC P63 frame
- Motor Flange Type: B5 (Large flange)
- Lubrication: Factory-filled synthetic oil (Sealed for life)
Expert Installation Advice: The Worm Gear «Running-In» Period
A critical engineering principle that is often ignored during commissioning is the mechanical «running-in» phase. Expert Tip: Because the VF 30 utilizes a sliding friction contact between the steel worm shaft and the bronze worm wheel, the gearbox will not reach its catalog-rated peak efficiency immediately out of the box. It requires approximately 24 to 48 hours of operation under nominal load for the bronze teeth to perfectly lap and mate with the steel shaft. During this initial running-in period, you may notice the gearbox runs slightly hotter than normal and draws slightly more motor current. This is perfectly normal. Do not immediately assume the gearbox is undersized or defective. Allow the unit to run in, and the operating temperature will stabilize.
Maintenance and Lubrication
The Bonfiglioli VF 30 frame size is a «sealed-for-life» unit. It comes factory-filled with premium synthetic oil designed specifically for the extreme pressure sliding friction of worm gears. Because it is sealed, it does not require breather plugs, oil level checks, or periodic oil changes, allowing it to be mounted in any physical orientation without the risk of leakage. However, during routine visual inspections, ensure the exterior aluminum housing is kept clean of dust and debris, as a layer of factory grime will act as an insulator and prevent the gearbox from dissipating internal heat.
Frequently Asked Questions (FAQs)
Q: What does the P63 B5 designation mean for my motor?
A: This defines the input geometry. It means the gearbox will accept a standard IEC size 63 electric motor that features a B5-style large mounting flange and a standard 11mm motor shaft diameter.
Q: Is this gearbox self-locking?
A: With a ratio of 30:1, the VF 30 exhibits «dynamic irreversibility» under certain conditions, meaning the load has difficulty back-driving the motor. However, it is not guaranteed to be statically self-locking. If holding a suspended load is required for safety, you must use an external motor brake.
Do you need more references from this brand? Explore our full catalog of Bonfiglioli here.
