Get now the 1794-OE8H, a high-density 8-channel analog output module with integrated HART (Highway Addressable Remote Transducer) protocol capabilities. This Allen-Bradley module is the professional choice for modern process plants requiring both precise control signals and deep diagnostic data from intelligent field instruments.
What Is the 1794-OE8H?
The 1794-OE8H is a sophisticated FLEX I/O module that combines eight channels of analog current output with the ability to communicate HART digital data. It allows the control system to switch between standard 4-20mA control and digital parameterization of field devices like smart valves. This dual-purpose functionality enables asset management software to monitor device health, configuration, and secondary variables over the same pair of wires used for the control signal.
Key Technical Specifications
- Channels: 8 Analog Outputs with HART
- Output Range: 0…22 mA (configured for 4-20mA)
- Resolution: 13-bit
- HART Protocol: Version 5, 6, and 7 supported
- Isolation: 50V (continuous) between outputs and FLEXBus
- Accuracy: 0.1% of full scale at 25°C
- Terminal Base: 1794-TB3G, 1794-TB3GS
Intelligent Process Integration
The 1794-OE8H is a cornerstone of «Connected Enterprise» strategies. By utilizing the HART data, engineers can perform remote calibration and predictive maintenance. It integrates perfectly with FactoryTalk AssetCentre, providing a window into the health of smart actuators. This significantly reduces manual inspection times and prevents unexpected process shutdowns by identifying valve friction or electronics degradation early.
Expert Tips
When configuring the 1794-OE8H, ensure that the «HART Enable» bit is set for the specific channels where you intend to communicate with smart devices. Be aware that the HART signal is a high-frequency digital AC signal superimposed on the DC current; therefore, avoid using low-pass filters or surge protectors that might strip the HART frequency from the loop.
Frequently Asked Questions
Q: Does the HART communication affect the analog 4-20mA signal?
A: No, the HART signal uses FSK (Frequency Shift Keying) which has an average value of zero. It does not interfere with the primary analog value used for control.
Q: Can this module be used with standard non-HART devices?
A: Absolutely. If a non-HART device is connected, the module functions as a high-precision 8-channel 4-20mA analog output module without any compatibility issues.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here: https://atlantechdrives.com/manufacturers/allen-bradley/
