Purchase now the 1794-OE4, a high-reliability 4-channel analog output module engineered for the Allen-Bradley FLEX I/O platform. This module is essential for industrial processes requiring precise control of actuators, such as variable speed drives and control valves, by converting digital controller data into standard analog voltage or current signals.
What Is the 1794-OE4?
The 1794-OE4 is a versatile analog output module that provides four non-isolated channels. It is part of the widely used FLEX I/O system, known for its modularity and space-saving design. The module interfaces with various industrial networks via communication adapters, allowing for distributed control. Its primary function is to deliver accurate 0-20mA, 4-20mA, or +/-10V signals to field devices, ensuring smooth and responsive automation transitions.
Key Technical Specifications
- Channels: 4 non-isolated single-ended
- Resolution: 12-bit binary
- Output Ranges: 0…20 mA, 4…20 mA, +/-10V, 0…10V
- Conversion Rate: 1.024 ms all channels
- External DC Power: 24V DC (10.5…31.2V DC range)
- Step Response: 0.1 ms
- Terminal Base Compatibility: 1794-TB2, 1794-TB3, 1794-TB3S, 1794-TBN
Architecture and System Design
Designed for flexibility, the 1794-OE4 mounts on a terminal base that houses the field wiring. This architecture supports Removal and Insertion Under Power (RIUP), enabling maintenance without shutting down the entire system. It is fully compatible with ControlLogix, CompactLogix, and legacy PLC-5 systems, making it a staple in retrofitting and modernizing industrial plants.
Installation Advice
When installing the 1794-OE4, ensure the terminal base keyswitch is set to position 4. To minimize electrical noise interference on sensitive analog signals, always use shielded twisted-pair cabling. Connect the cable shield to the functional earth ground at the terminal base end only to prevent ground loops that could degrade signal integrity and cause control jitter.
Frequently Asked Questions
Q: Does the 1794-OE4 require an external power supply?
A: Yes, it requires an external 24V DC power source connected to the terminal base to power the analog output circuitry and the field-side electronics.
Q: Can I mix voltage and current outputs on the same module?
A: No, while the module supports both types, the configuration is typically applied per module or group depending on the adapter and controller used. Consult your Logix Designer profile for specific channel-level granularity.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here: https://atlantechdrives.com/manufacturers/allen-bradley/
