Purchase now: Allen-Bradley 1762-L40BWAR MicroLogix 1200 Controller
Atlantechdrives provides you the 1762-L40BWAR, a specialized version of the high-density 40-point MicroLogix 1200. The «R» in the part number signifies a critical feature for industrial maintenance: Removable Terminal Blocks. This unit combines 120/240V AC power with 24V DC inputs and relay outputs, offering the same robust performance as the standard L40BWA but with enhanced serviceability.
- Feature: Removable Terminal Blocks (RTB)
- Input Power: 120/240V AC
- Total I/O: 40 Points (24 DC In, 16 Relay Out)
- Memory: 6KB Program/Data
- Communication: Port 0 RS-232 (Mini-DIN)
- Expansion: Up to 6 expansion modules
Technical Performance: Enhanced Serviceability with 1762-L40BWAR
The 1762-L40BWAR is engineered for mission-critical applications where Mean Time to Repair (MTTR) must be minimized. In the event of a controller failure, the removable terminal blocks allow maintenance staff to swap the entire PLC unit in minutes without disconnecting a single field wire. This prevents wiring errors during the replacement process and drastically reduces production downtime. Electrically, the unit is identical to the L40BWA, featuring a high-speed logic engine and 16 robust relay outputs capable of handling diverse AC and DC loads. It is a favorite for water treatment plants, grain elevators, and industrial ovens where the PLC is mounted in difficult-to-reach locations and wiring complexity is high.
Installation Advice: RTB Seating and Grounding
When installing the 1762-L40BWAR, ensure that the removable terminal blocks are fully seated and the retention screws are tightened. A loose RTB can cause intermittent contact, leading to erratic I/O behavior or thermal arcing at the power terminals. For grounding, use a dedicated 12 AWG copper wire from the chassis ground terminal to the main panel ground bus. Since the BWAR uses AC power, keeping the ground path clean is essential to dissipate internal transient noise from the switching power supply. If your 24V DC inputs are connected to long-distance sensors, use shielded cables and tie the shield to the panel ground at the entry point of the cabinet to prevent EMI from entering the RTB.
Maintenance: Best Practices for Removable Terminals
The primary maintenance advantage of the 1762-L40BWAR is its «hot-swap wiring» capability, though power should always be disconnected before physically removing the RTB. Periodically check the terminal blocks for any signs of heat discoloration, which could indicate a loose screw terminal on a high-current relay point. The 1762-L40BWAR includes a series of status LEDs for the 24 inputs and 16 outputs; during your monthly walkthrough, verify that the «Power» LED is solid green and the «Fault» LED is dark. If you are using expansion modules, ensure the 1762 bus ribbon cable is not being pinched by the RTB housing when the cabinet door is closed. Sourcing your 1762-L40BWAR from Atlantechdrives guarantees a reliable, tested unit that prioritizes your facility’s operational uptime.
FAQs
Q: Can I use the terminal blocks from a standard 1762-L40BWA on a BWAR model?
A: No, the terminal blocks on the standard L40BWA are fixed (non-removable), while the BWAR uses a specific RTB design.
Q: What is the maximum current for the relay outputs?
A: Each relay is rated for 2.0 Amperes continuous current, with a total module limit that must be respected.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here.
