Purchase now: Allen-Bradley 1762-IQ8OW6 MicroLogix Combination I/O Module
Atlantechdrives provides you the 1762-IQ8OW6, a versatile and space-saving combination module designed for the MicroLogix 1100, 1200, and 1400 expansion systems. This «Combo» module is the ideal solution for small automation projects where both digital inputs and relay outputs are required but DIN rail space is limited. By integrating two different I/O types into a single expansion slot, it provides maximum flexibility for machine builders and maintenance engineers.
- Inputs: 8 Sink/Source 24V DC Inputs
- Outputs: 6 Individually Isolated Relay Outputs
- Operating Voltage: 10-30V DC (Inputs) / 5-265V AC, 5-125V DC (Outputs)
- Bus Current Draw: 110 mA @ 5V DC / 80 mA @ 24V DC
- Connector Type: Finger-safe screw terminals
Technical Architecture: Hybrid Efficiency in 1762-IQ8OW6
The 1762-IQ8OW6 is engineered to handle diverse signal types simultaneously. The input section consists of 8 points that can be wired in either sinking or sourcing configurations, allowing for compatibility with a wide range of proximity sensors and limit switches. The output section features 6 robust mechanical relays. Unlike solid-state outputs, these relays provide physical isolation and the ability to switch varying voltage levels—from low-voltage DC signals to standard 240V AC motor starter coils. Each relay point is designed for high-capacity switching, supporting up to 2.0A continuous current. This combination of DC sensing and AC/DC switching makes the 1762-IQ8OW6 a cornerstone for applications like small pump stations, conveyor diversions, and basic HVAC control systems where a dedicated module for each type would be underutilized.
Expert Tips: Inductive Load Protection for Relays
To ensure the long-term reliability of the 1762-IQ8OW6, protecting the mechanical relay contacts is mandatory. When switching inductive loads such as solenoids or contactors, a «back-EMF» spike occurs during de-energization. For AC loads, we strongly recommend installing an RC snubber across the load. For DC loads, a flyback diode is essential. This practice prevents contact welding and reduces electrical noise that could interfere with the 8 DC inputs located on the same module. If you notice an input «flickering» while a relay is switching, it is usually a sign of electromagnetic interference (EMI) that can be mitigated by better cable separation and proper suppression at the load.
Maintenance and Expansion Bus Integrity
The 1762-IQ8OW6 communicates with the MicroLogix controller via a flat ribbon bus cable. During routine maintenance, ensure that the bus latch is fully engaged and that the cable is not under tension. Because this module draws both 5V and 24V current from the controller’s internal power supply, always verify your power budget in RSLogix 500 or Studio 5000. If the system experiences intermittent «I/O Configuration Error» faults, the first step is to inspect the expansion bus pins for oxidation or physical damage. The front panel features 14 status LEDs; use these to verify field-side power before troubleshooting the PLC logic. Sourcing authentic 1762-IQ8OW6 units from Atlantechdrives guarantees a component that meets the rigorous industrial standards of Rockwell Automation.
FAQs
Q: Can I use different voltages on each relay output?
A: Yes, the relay outputs on the 1762-IQ8OW6 are isolated, allowing you to switch 24V DC on one point and 120V AC on another.
Q: Does the module support high-speed counting?
A: No, the 1762-IQ8OW6 is designed for standard discrete I/O. For high-speed tasks, use the embedded inputs on the MicroLogix base unit.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here.
This compact 8-point DC input card is a reliable entry point for expanding 1762-L24BXB MicroLogix units.
This combination input/output module is a space-saving solution for expanding the capacity of your MicroLogix 1200 L24BXB controller.
