Buy now: Allen-Bradley 1761-CBL-AS03 Communication Cable
Atlantechdrives provides you the 1761-CBL-AS03, a high-performance 3-meter (10-foot) communication cable designed to bridge the gap between MicroLogix controllers and the SLC 500 family or the 1747-AIC Link Coupler. This cable is vital for integrating disparate Allen-Bradley systems into a unified DH-485 network, ensuring reliable data synchronization across your factory floor.
- Connectors: 8-Pin Mini-DIN to 6-Pin Phoenix/DH-485 Style
- Length: 3 Meters (10 feet)
- Protocol Support: DH-485
- Compatibility: MicroLogix 1000/1100/1200/1400/1500 and SLC 5/01, 5/02, 5/03
- Construction: Heavy-duty industrial jacket
Technical Performance: Bridging Legacy Architectures
The 1761-CBL-AS03 is engineered for versatility and long-distance reliability. With a 3-meter reach, it allows for communication between controllers mounted in different sections of a large enclosure. The cable handles the conversion between the 8-pin mini-DIN port found on MicroLogix units and the DH-485 infrastructure used by the SLC 500 series. This is critical for legacy system support, where a newer MicroLogix might need to act as a gateway or remote I/O for an existing SLC-based machine. The high-quality internal twisted-pair conductors are designed to maintain signal integrity over the full 10-foot length, preventing the packet loss that often occurs with non-OEM or poorly shielded «homemade» cables.
Expert Tips: Network Termination and Grounding
When using the 1761-CBL-AS03 in a DH-485 network, proper termination is essential. Ensure that the network is terminated at both ends to prevent signal reflection. Because this cable connects different chassis, always verify that the ground potentials between the MicroLogix and the SLC/AIC+ are the same. A ground potential difference can cause «noise» to travel through the 1761-CBL-AS03, potentially damaging the communication ports of the controllers. We recommend routing the cable through grounded metal conduit if it must pass near high-current AC lines or variable frequency drives.
Maintenance and Lifecycle Reliability
The 1761-CBL-AS03 is a robust cable, but the 8-pin mini-DIN end is a common point of failure if disconnected frequently. Periodically inspect the pins and the 6-pin connector block for signs of corrosion or loose wiring. For systems in high-vibration areas, ensure the cable is strain-relieved at both ends. If your DH-485 network shows «intermittent node loss,» the 1761-CBL-AS03 is often the culprit due to physical wear. Keeping a tested spare 1761-CBL-AS03 in your maintenance inventory is a cost-effective way to ensure that legacy network communication can be restored instantly during a troubleshooting event.
FAQs
Q: Can I use this cable for RS-232 communication?
A: No, the 1761-CBL-AS03 is specifically wired for DH-485 network levels and connector pinouts.
Q: Does it work with the MicroLogix 1100’s Ethernet port?
A: No, this cable connects to the Serial port (Channel 0) of the MicroLogix, not the Ethernet port.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here.
To establish serial communication between a MicroLogix node and a 1761-NET-AIC converter, use this dedicated interface cable.
