Purchase now: Allen-Bradley 1761-CBL-AM00 MicroLogix Communication Cable
Atlantechdrives provides you the 1761-CBL-AM00, a specialized 8-pin mini-DIN to 8-pin mini-DIN communication cable designed for the MicroLogix controller family. This cable is essential for establishing a reliable serial connection between MicroLogix 1000, 1100, 1200, 1400, and 1500 processors and peripheral devices such as the Advanced Interface Converter (AIC+).
- Connectors: 8-Pin Mini-DIN to 8-Pin Mini-DIN
- Length: 45 cm (17.7 inches)
- Protocol: RS-232 / DH-485 Compatible
- Application: Connection to AIC+ or DNI modules
- Shielding: Industrial-grade noise immunity
Technical Engineering: Reliable Data Transfer for MicroLogix
The 1761-CBL-AM00 is engineered to provide high-integrity data transmission in electromagnetically noisy industrial environments. Unlike generic serial cables, the AM00 version is manufactured to Allen-Bradley’s strict impedance and shielding specifications, ensuring that the DH-485 or DF1 protocols are not interrupted by EMI from nearby motor drives. Its compact 45cm length is specifically designed for inter-module connections within a control panel, minimizing cable clutter while maintaining a clean signal path. This cable is the primary link used when a MicroLogix controller needs to be integrated into a larger DH-485 network via an AIC+ module, allowing for seamless data exchange between legacy PLC-5, SLC 500, and modern MicroLogix systems.
Installation Advice: Pin Alignment and Connector Care
When installing the 1761-CBL-AM00, the most critical factor is the alignment of the 8-pin mini-DIN connectors. These pins are fragile; always ensure the arrow on the connector housing is facing upward and perfectly aligned with the controller port before applying pressure. Never «force» the connection, as bent pins can cause intermittent communication faults that are notoriously difficult to diagnose. We recommend using cable ties to secure the 45cm span, ensuring that the weight of the cable does not put mechanical stress on the mini-DIN ports, which are surface-mounted to the PLC’s internal circuit board.
Maintenance: Preventing Signal Degradation
The 1761-CBL-AM00 is a passive component, but it should be inspected during every routine maintenance window. Check the mini-DIN connectors for signs of oxidation or bent pins. In environments with high vibration, ensure that the cable hasn’t vibrated loose. If you experience «Comm Fault» errors on your controller, swapping the 1761-CBL-AM00 is the fastest diagnostic step. Keeping a spare on-site is a standard practice for maintenance departments, as these cables are often damaged during system upgrades or panel cleaning. By using an authentic Allen-Bradley 1761-CBL-AM00, you preserve the signal timing and voltage levels required for reliable serial networking.
FAQs
Q: Can I use the 1761-CBL-AM00 for programming with a PC?
A: No, this cable has mini-DIN on both ends. For PC programming, you typically need the 1761-CBL-PM02 (DB9 to Mini-DIN).
Q: Is the cable shielded?
A: Yes, it features high-quality industrial shielding to protect serial data from electromagnetic interference.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here.
This master port cable is the primary link for connecting your PC to a MicroLogix 1000 1761-L32BWA controller.
