Purchase now: Allen-Bradley 1756-IA16 Input Module
Purchase now: Atlantechdrives provides you the 1756-IA16, a premium industrial-grade 120V AC digital input module designed exclusively for the Allen-Bradley ControlLogix 1756 programmable automation controller (PAC) platform. Manufactured by Rockwell Automation, this highly reliable 16-channel input card serves as the critical interface between real-world sensory devices—such as limit switches, pushbuttons, proximity sensors, and relay contacts—and the main ControlLogix processor. Operating seamlessly within the 79 to 132 Volts AC voltage range, the 1756-IA16 is engineered for heavy-duty manufacturing environments where robust electrical isolation and signal integrity are paramount. It effectively digitizes high-voltage AC field signals, transmitting them across the ControlLogix backplane to the CPU for rapid logic execution. This module is an absolute standard in automotive assembly lines, food and beverage processing plants, and heavy material handling systems where 120VAC control circuits are widely utilized.
Technical Specifications of the 1756-IA16
The 1756-IA16 module organizes its 16 digital inputs into two isolated groups of 8 points each, providing excellent flexibility for wiring different power phases while maintaining strict electrical isolation between groups to prevent catastrophic ground loops.
- Part Number: 1756-IA16
- Platform: ControlLogix 1756 System
- Input Type: Digital AC Input
- Number of Inputs: 16 Points (2 groups of 8)
- Operating Voltage Range: 79…132V AC, 47…63 Hz
- Nominal Input Voltage: 120V AC
- Maximum Input Current: 15 mA at 132V AC
- Backplane Current Draw: 115 mA at 5.1V DC; 2 mA at 24V DC
Expert Installation Advice: RTB Selection and Input Filtering
Unlike standard generic PLCs, the ControlLogix system utilizes a modular wiring approach. Expert Tip: The 1756-IA16 module does not come with physical wiring terminals out of the box. You must separately purchase a Removable Terminal Block (RTB) to connect your field wires. For this specific 16-point module, you will need either the 1756-TBCH (36-pin cage clamp) or the 1756-TBS6H (36-pin spring clamp) housing. Furthermore, when configuring this module within Rockwell’s Studio 5000 Logix Designer software, pay strict attention to the «Input Filter Times». In industrial environments with heavy electromagnetic interference (EMI) or mechanical switch bounce, you must increase the hardware delay times (e.g., from 1ms to 2ms or 5ms) to prevent the PAC from reading false positive signals caused by electrical noise on long factory cable runs.
Maintenance: Backplane Insertion and Hot-Swapping
The ControlLogix architecture is highly advanced, supporting true RIUP (Removal and Insertion Under Power). This means that if a 1756-IA16 module suffers a hardware failure due to a severe field overvoltage, a maintenance technician can physically extract the damaged card from the chassis and slide a new one in while the rest of the PLC rack remains fully powered and operational. However, before hot-swapping, you must always physically disconnect the RTB (the front terminal block) from the module to remove the live 120VAC field power. Never attempt to pull the module from the backplane with a live RTB still attached, as this can cause dangerous electrical arcing.
Frequently Asked Questions (FAQs)
Q: Can the 1756-IA16 module detect open wire faults or loss of field power?
A: No. The standard 1756-IA16 is a basic digital input module and does not feature advanced channel-level diagnostics. If you require open wire detection or advanced fault reporting, you would need to upgrade to a diagnostic-capable module like the 1756-IA8D.
Q: What is the power dissipation of this module inside the chassis?
A: The 1756-IA16 has a maximum thermal power dissipation of approximately 5.8 Watts. It is crucial to calculate the total heat dissipation of all modules in your rack to ensure the chassis power supply and enclosure cooling are adequately sized.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here.
