2904597 Phoenix Contact QUINT4 24V 1.3A Power Supply – Buy

Phoenix Contact 2904597 QUINT4-PS/1AC/24DC/1.3/SC – 24 V DC, 1.3 A Power Supply

The Phoenix Contact 2904597 (QUINT4-PS/1AC/24DC/1.3/SC) is the smallest single-phase, primary-switched DIN rail power supply in the fourth-generation QUINT POWER range. It delivers 24 V DC at 1.3 A (30 W) in a housing only 22.5 mm wide. A static boost to 1.625 A and a dynamic boost to 2.6 A for 5 s let it start heavy loads reliably. It also offers preventive function monitoring, a configurable signal output and an output adjustable from 24 to 28 V DC, bringing QUINT-level system availability to very compact control boxes.

What the Part Number Means

  • 2904597 – Phoenix Contact order number
  • QUINT4 – QUINT POWER, fourth generation
  • PS – Power supply
  • 1AC – Single-phase AC input (DC input also possible)
  • 24DC – 24 V DC output
  • 1.3 – 1.3 A nominal output current
  • SC – Screw connection

Key Features

  • Dynamic boost: 2.6 A for 5 s (60 W) to start heavy loads
  • Static boost: 1.625 A continuous (38 W, up to 40 °C)
  • Ultra-slim design: only 22.5 mm wide
  • Long mains buffering: typ. 43 ms at 120 V AC and 230 V AC
  • Preventive function monitoring: configurable signal output and a power threshold set by rotary selector switch
  • AC or DC input: 100–240 V AC or 110–250 V DC
  • Low losses: no-load dissipation under 0.4 W
  • NEC Class 2: UL 1310 approval

Key Specifications (Phoenix Contact 2904597 Datasheet)

Input

  • AC input: 100–240 V AC (-15% / +10%), 50–60 Hz
  • DC input: 110–250 V DC (-20% / +40%)
  • Current consumption (AC): 0.46 A at 100 V AC / 0.2 A at 230 V AC
  • Current consumption (DC): 0.4 A at 110 V DC / 0.17 A at 250 V DC
  • Nominal power consumption: 37 VA
  • Inrush current: typ. 5.9 A (I²t < 0.1 A²s)
  • Mains buffering: typ. 43 ms at 120 V AC and 230 V AC
  • Input fuse: 3.15 A slow-blow, internal
  • Recommended breaker: 6–16 A (characteristic B, C or comparable)

Output

  • Nominal output voltage: 24 V DC
  • Setting range: 24–28 V DC (constant capacity)
  • Nominal output current: 1.3 A (30 W)
  • Static boost: 1.625 A (38 W, ≤ 40 °C)
  • Dynamic boost: 2.6 A for 5 s (60 W, ≤ 60 °C)
  • Output characteristic: U/I Advanced
  • Efficiency: typ. 90.7% at 230 V AC / typ. 89.2% at 120 V AC
  • Residual ripple: < 40 mVpp
  • Overvoltage protection: ≤ 32 V DC
  • Control deviation: < 0.5% static / < 2% dynamic
  • No-load power dissipation: < 0.4 W
  • Power loss at nominal load: < 3.1 W at 230 V AC / < 3.7 W at 120 V AC
  • Short-circuit proof and no-load proof
  • Parallel connection for redundancy and higher capacity; series connection possible

Signalling

  • Configurable digital signal output: 24 V DC, 30 mA (default: active when output voltage > 0.9 × USet)
  • Green LED: on when output voltage > 0.9 × USet, flashing below
  • Yellow LED: output power above the threshold set on the rotary selector

General Data

  • Connection: screw terminals, 0.14–2.5 mm² (AWG 26–14), torque 0.5–0.6 Nm
  • Mounting: DIN rail
  • Clearances: 30 mm top and bottom; 5–15 mm left and right depending on load
  • Housing: polycarbonate, UL 94 V0, IP20, protection class II
  • MTBF (IEC 61709, SN 29500): > 1,904,000 h at 25 °C / > 1,107,000 h at 40 °C
  • Ambient temperature (operation): -25 °C to +70 °C, derating 2.5%/K above +60 °C
  • Start-up: type-tested at -40 °C
  • Altitude: up to 5000 m (derating above 2000 m)
  • Dimensions (W × H × D): 22.5 × 99 × 90 mm
  • Weight: approx. 187 g

Approvals and Standards

  • UL/cUL Listed (UL 61010-1, UL 61010-2-201), UL 1310 Class 2 Power Units
  • UL 121201 and CSA C22.2 No. 213: Class I, Division 2, Groups A–D, T4 (hazardous locations)
  • Marine: DNV, BV
  • IECEE CB Scheme, EAC
  • IEC 61010-2-201 (SELV/PELV), IEC 61558-2-16, EN 61204-3
  • EMC: IEC 61850-3 immunity, EN 55016 Class B emissions

Typical Applications

  • 24 V DC supply for sensors, small PLCs and I/O modules
  • Relays, small valves and signal circuits with high inrush currents
  • Compact control boxes and distribution boards
  • Machine building, building automation and energy applications
  • Redundant 24 V systems with preventive monitoring

Buy the Phoenix Contact 2904597 from Atlantech Drives

Atlantech Drives supplies the Phoenix Contact 2904597 QUINT4-PS/1AC/24DC/1.3/SC with fast worldwide shipping and a 12-month warranty. Our experienced sales team can also quote other QUINT4, TRIO and UNO power supplies, as well as QUINT4 UPS and redundancy modules. Request a quote today for price and availability.

More Phoenix Contact Products

Manufacturer website: Phoenix Contact

Check Price & Availability!

Get a fast, no-obligation quote for this part.

Our technical team responds within 24-48 hours.

  • Express Worldwide Shipping
  • 100% Genuine OEM Parts

We can supply you this part. Just get in touch!

Logo Pagos Seguros
Trustpilot logoTrustpilot
Great rating
TrustScore 4.4
13 reviews