Burkert 125341 – Type 6014 3/2-Way Direct-Acting Solenoid Valve, Normally Closed, 24 V DC
The Burkert 125341 (00125341) is a Type 6014 direct-acting 3/2-way plunger valve in circuit function C (normally closed). It is one of Bürkert’s standard threaded versions, with these features:
- Brass body with G 1/8 internal thread
- FKM seals
- 2.5 mm orifice
- 0 – 6 bar pressure range
- 24 V DC coil
At rest, inlet port 1 (P) is closed and outlet port 2 (A) is vented to exhaust port 3 (R). When the coil is energised, P connects to A and pressurises the downstream actuator or circuit.
Largest Orifice in the Standard 6014 Range
The 2.5 mm orifice is the largest in the standard Type 6014 range. It gives the highest flow of the series, with a Kv value of 0.16 m³/h (water). For comparison, the 1.5 mm version reaches 0.07 m³/h and the 2.0 mm version 0.11 m³/h. The trade-off is pressure: 0 – 6 bar, compared with 10 bar for DN 2.0 and 16 bar for DN 1.5. This makes the 125341 a good fit wherever fast filling and venting of a pneumatic actuator matter more than very high supply pressure.
Key Technical Data – Burkert 125341
- Manufacturer article: 125341 / 00125341 – Type 6014
- Function: 3/2-way, direct-acting plunger valve, circuit function C (normally closed)
- Orifice: 2.5 mm (7/64 inch)
- Kv value (water): 0.16 m³/h
- Pressure range: 0 – 6 bar
- Port connection: G 1/8 internal thread
- Body / seals: Brass / FKM
- Coil: 24 V DC, 8 W, polyamide coil (class B), ±10 % voltage tolerance
- Response times: opening 15 – 20 ms, closing 10 – 22 ms
- Duty cycle: 100 % continuous operation
- Medium temperature: -10 to +100 °C
- Ambient temperature: max. +55 °C
- Media: Technical vacuum, neutral gases and liquids (e.g. compressed air, natural gas, water, hydraulic oil), max. 21 mm²/s viscosity
- Electrical connection: DIN EN 175301-803 form A, IP65 with cable plug Type 2518 (ordered separately)
Construction
The stopper and core guide tube are welded together for higher pressure resistance and leak-tightness. The bolted coil system resists vibration. Internal parts are stainless steel (stopper, magnetic core, core guide tube and springs), with a copper shading ring in the brass body.
Using the 125341 in Other Circuit Functions
Each 6014 has springs matched to its circuit function. For a DN 2.5 valve built as circuit function C, Bürkert gives these limits when it is connected differently:
- Function A (2/2 NC): up to 6 bar
- Function B (2/2 NO): up to 9 bar
- Function D (3/2 NO) or T (universal): up to 0.7 bar
Same Valve, Other Voltages and Ports
- 125340: 24 V 50 Hz
- 125342: 230 V 50 Hz
- 126142 / 126143 / 126145: G 1/4 equivalents (24 V DC / 24 V 50 Hz / 230 V 50 Hz)
Typical Applications
- Pilot control of single-acting pneumatic actuators and process valves
- Compressed-air and neutral gas switching in machine building
- Small-flow liquid control in OEM equipment
Buy Burkert 125341 from Atlantech Drives
- Genuine Bürkert valve, covered by a 12-month warranty
- Fast worldwide shipping
- Senior commercial advice to check circuit function, orifice and coil voltage against your type label
- Quick, no-obligation quotes. Get a quote today.
Related Bürkert Products
- Burkert 466298 Direct-Acting Solenoid Valve Type 6014
- Burkert 356135 Solenoid Coil for Type 6013/6014
- Burkert 314802 Cable Plug Type 2518 (Form A)
- Burkert 00454789 Pneumatic Angle Seat Valve Type 2000
- All Burkert products
