1110466 Phoenix Contact UNO2-PS/1AC/24DC/120W | In Stock

Phoenix Contact 1110466 UNO2-PS/1AC/24DC/120W – 24 V DC, 5 A Power Supply

The Phoenix Contact 1110466 (UNO2-PS/1AC/24DC/120W) is a single-phase, primary-switched DIN rail power supply. It belongs to the new UNO2 generation of the Phoenix Contact UNO POWER range. It delivers 24 V DC at 5 A (120 W) in a housing only 35 mm wide, with typical efficiency of up to 94%. The output voltage can be adjusted from 24 to 28 V DC. The first-generation UNO units only have a status LED, but the UNO2 adds a DC OK LED and a floating DC OK switching contact for remote monitoring.

What the Part Number Means

  • 1110466 – Phoenix Contact order number
  • UNO2 – UNO POWER, second generation
  • PS – Power supply
  • 1AC – Single-phase AC input
  • 24DC – 24 V DC output
  • 120W – 120 W output power (5 A at 24 V)

Key Features

  • High efficiency: typ. 94% at 230 V AC and 93% at 120 V AC
  • Compact: only 35 mm wide
  • Adjustable output: 24 to 28 V DC
  • DC OK signalling: green LED plus a floating OptoMOS contact (13/14)
  • Short-circuit and no-load proof
  • Wide temperature range: -25 °C to +70 °C, with type-tested start-up at -40 °C
  • Hazardous locations: ANSI/UL 121201 Class I, Division 2, Groups A–D

Key Specifications (Phoenix Contact 1110466 Datasheet)

Input

  • Nominal input voltage: 100–240 V AC (-15% / +10%)
  • Derating: 1%/V below 100 V AC
  • Frequency: 50–60 Hz ±10%
  • Current consumption:
    • 1.34 A at 100 V AC
    • 1.1 A at 120 V AC
    • 0.59 A at 230 V AC
    • 0.57 A at 240 V AC
  • Inrush current: typ. 35 A at 25 °C (I²t < 0.7 A²s)
  • Mains buffering: typ. 25 ms at 120 V AC and 230 V AC
  • Switch-on time: typ. 1 s
  • Internal input fuse: 3.15 A, slow-blow
  • Recommended circuit breaker: 6–20 A (characteristic B, C, D or K)
  • Protective circuit: transient surge protection (varistor)

Output

  • Nominal output voltage: 24 V DC
  • Setting range: 24–28 V DC (constant capacity restricted above 24 V DC)
  • Nominal output current: 5 A
  • Output power: 120 W
  • Efficiency: typ. 94% at 230 V AC / typ. 93% at 120 V AC
  • Residual ripple: typ. 70 mVpp
  • Overvoltage protection (OVP): ≤ 35 V DC
  • Control deviation:
    • < 1% static (load change 10–90%)
    • < 3% dynamic
    • < 0.1% for a ±10% input voltage change
  • No-load power dissipation: < 0.4 W at 120 V AC / < 0.75 W at 230 V AC
  • Power loss at nominal load: < 7.5 W at 230 V AC
  • Protection: short-circuit proof and no-load proof
  • Parallel connection: yes, for higher power and for redundancy (with diode)
  • Series connection: yes, for higher output voltage

Signalling

  • DC OK LED (green): on when the output voltage is above 0.9 × nominal
  • DC OK contact (13/14): floating OptoMOS contact
    • Rated max. 30 V AC/DC (60 V DC max.) and 50 mA
    • Closes when the output voltage is above 0.9 × nominal

General Data

  • Connection: screw terminals, 0.2–2.5 mm² (AWG 24–14), torque 0.5–0.6 Nm
  • Mounting:
    • DIN rail NS 35 (EN 60715), horizontal
    • Clearance 0 mm left and right, 30 mm top and bottom
  • Housing: polycarbonate, UL 94 V0
  • Degree of protection: IP20
  • Protection class: II
  • Insulation voltage input/output: 4 kV AC (type test)
  • MTBF (IEC 61709, SN 29500):
    • 1,442,000 h at 25 °C

    • 813,000 h at 40 °C

    • 428,000 h at 55 °C

  • Ambient temperature (operation): -25 °C to +70 °C, derating 2.5%/K above +55 °C
  • Start-up: type-tested at -40 °C
  • Storage temperature: -40 °C to +85 °C
  • Altitude: ≤ 4000 m, derating 10%/1000 m above 2000 m
  • Dimensions (W × H × D): 35 × 130 × 129 mm
  • Weight: approx. 310 g

Approvals and Standards

  • cULus Listed: UL 61010-1, UL 61010-2-201
  • ANSI/UL 121201 Class I, Division 2, Groups A–D, T4 (hazardous locations)
  • CB Scheme (IEC 61010-1, IEC 61010-2-201), BIS, EAC
  • IEC 61010-2-201 (SELV/PELV), EN 61558-2-16
  • SEMI F47-0706
  • EMC: EN 61000-6-2 (immunity) and EN 61000-6-3 / EN 61000-6-4 (emissions)

Typical Applications

  • 24 V DC supply for PLCs, I/O modules and HMIs in control cabinets
  • Sensors, actuators, relays and valve terminals
  • Machine building and process automation
  • Building automation and infrastructure
  • Installations that need a DC OK signal sent to the PLC

Buy the Phoenix Contact 1110466 from Atlantech Drives

Atlantech Drives supplies the Phoenix Contact 1110466 UNO2-PS/1AC/24DC/120W with fast worldwide shipping and a 12-month warranty. Our experienced sales team can also quote other UNO, TRIO and QUINT power supplies. Request a quote today for price and availability.

More Phoenix Contact Products

Manufacturer website: Phoenix Contact

 

Check Price & Availability!

Get a fast, no-obligation quote for this part.

Our technical team responds within 24-48 hours.

  • Express Worldwide Shipping
  • 100% Genuine OEM Parts

We can supply you this part. Just get in touch!

Logo Pagos Seguros
Trustpilot logoTrustpilot
Great rating
TrustScore 4.4
13 reviews