Purchase now IC695MDL664 GE Fanuc Input Module
The IC695MDL664 is a robust 16-Point Discrete Smart Input Module specifically developed by GE Fanuc for the advanced PACSystems RX3i automation platform. This highly versatile module operates at 24 VDC and is engineered to interface with a wide variety of industrial field devices, including proximity sensors, limit switches, and relay contacts. What sets the IC695MDL664 apart is its intelligent architecture, which supports both positive logic (sourcing) and negative logic (sinking) configurations. This dual compatibility significantly reduces the need to stock multiple types of input cards, streamlining spare parts inventory. By leveraging the high-speed PCI bus of the RX3i backplane, this module guarantees ultra-fast input scanning and optical isolation, protecting the main CPU from harmful voltage transients that are common on the factory floor.
Technical Specifications
- Part Number: IC695MDL664
- Manufacturer: GE Fanuc
- System Compatibility: PACSystems RX3i
- Input Capacity: 16 Discrete Points
- Operating Voltage: 24 VDC (Nominal)
- Logic Support: Positive (Sourcing) and Negative (Sinking)
- Isolation: 250 VAC continuous (Field to Backplane)
Installation Advice for Industrial Environments
Proper wiring of the IC695MDL664 is critical to ensure accurate signal detection. When installing this module, technicians must utilize a high-density terminal block assembly (either spring-style or box-style). Because the module supports both sinking and sourcing devices, meticulous attention must be paid to the common terminal wiring. If using PNP (sourcing) sensors, the common terminal must be connected to the negative side of the 24 VDC power supply. Conversely, NPN (sinking) sensors require the common to be wired to the positive terminal. Always route the 24VDC input signal wires in separate cable trays away from high-voltage AC lines to prevent inductive noise from causing false input triggers.
Diagnostics and Maintenance Strategies
The IC695MDL664 features a suite of advanced diagnostic capabilities that greatly simplify troubleshooting. Each of the 16 input points has an associated LED indicator on the front panel, providing instant visual confirmation of the field device’s state. For predictive maintenance, the module allows software-configurable input filter times (typically ranging from 0.5 ms to 100 ms). If mechanical limit switches begin to degrade and exhibit «contact bounce,» increasing the software filter time can temporarily resolve erratic signals until the physical switch is replaced, preventing unnecessary machine downtime.
Series Continuity
For large-scale distributed architectures, this discrete input module can be housed in a remote rack powered and managed by the IC695NIU001 Ethernet Network Interface Unit, creating a highly responsive decentralized control node.
Frequently Asked Questions (FAQs)
Q: Does the IC695MDL664 require a separate field power supply?
A: Yes, the module derives its internal logic power from the RX3i backplane, but a separate, external 24 VDC power supply is required to power the field sensors and the input circuits.
Q: Can I replace this module under power?
A: Yes, the RX3i platform supports hot-swapping. The IC695MDL664 can be inserted or removed from the backplane while power is applied without damaging the module or the system.
Do you need more references from this brand? Explore our full catalog of GE Fanuc here.
