Kobold KAL-D1415PST3 – KAL-D Compact Thermal Flow Switch, 1/2″ BSP, PNP NO, Micro-DC Plug
The Kobold KAL-D1415PST3 is a compact thermal (calorimetric) flow switch from Kobold’s KAL-D series. It has a 1/2″ BSP process connection, a PNP normally open transistor output, a 24 V DC supply and a 4-pin Micro-DC plug. Its wetted parts are 316L stainless steel.
The PNP (sourcing) output is the standard choice for most European PLCs, and the 1/2″ BSP (G) thread fits UK and European pipework directly. The KAL-D has no moving parts: its sensor tip is heated a few degrees above the liquid temperature, and the flowing liquid cools it in proportion to the flow velocity. When the flow reaches the field-adjustable setpoint, the output switches. With a smooth probe and nothing to stick or wear, it is very reliable and insensitive to dirt and solids. A microcontroller compensates for changes in liquid temperature, and an 8-LED bargraph shows the flow trend and the setpoint.
Key Technical Data – Kobold KAL-D1415PST3
- Series: Kobold KAL-D compact thermal flow switch
- Measuring principle: Calorimetric, no moving parts
- Process connection: 1/2″ BSP
- Media: Water-based liquids (at least 90 % water); not suitable for oils or fuels
- Switching range: 0.15–6.6 ft/s (approx. 0.05–2 m/s)
- Repeatability: ±2 %
- Response time: 5.6–12 s typical
- Max. pressure: 580 psig (40 bar)
- Operating temperature: –4 to +176 °F (–20 to +80 °C)
- Wetted parts: 316L stainless steel; housing 304 stainless steel
- Power supply: 24 V DC ±10 %, max. 150 mA
- Output: PNP open collector, normally open, max. 400 mA, short-circuit protected
- Setpoint adjustment: Potentiometer, flashing LED on 8-LED bargraph
- Status indicator: Dual-colour LED (red = alarm, green = flow)
- Electrical connection: Micro-DC plug, 4-pin male
- Degree of protection: NEMA 4X / IP65
Choosing the Right KAL-D Version
- KAL-D1415PST3: 1/2″ BSP, PNP normally open (this item)
- KAL-D1415NST3: 1/2″ BSP, NPN normally open
- KAL-D1415MST3 / RST3: NPN NC and PNP NC versions
- KAL-D1408PST3: 1/4″ BSP version
- KAL-D5415PST3: 1/2″ NPT version
A mating 807.037 plug with 6 ft cable is available as an accessory. Connection thread and output type must match the installation and the PLC input. Our sales team can help you confirm the right version.
Typical Applications
- No-flow and low-flow monitoring of cooling water circuits
- Protection of pumps against dry running
- Water treatment and dosing systems
- Replacement switches for installed KAL-D systems
Buy Kobold KAL-D1415PST3 from Atlantech Drives
- Fast sourcing, shipped worldwide
- 12-month warranty
- Senior commercial advice on flow switch versions and lead time
- Quick, no-obligation quotes: get a quote today
