Koganei CDAS25X50-B-ZE235A2 Jig Cylinder – Ø25 mm Bore, 50 mm Stroke, Male Rod End
The Koganei CDAS25X50-B-ZE235A2 is a compact, double-acting Jig Cylinder from the Koganei C Series, with a Ø25 mm bore, a 50 mm stroke and a male thread rod end. It has a built-in magnet and comes with two ZE235 solid-state sensor switches with vertical 1000 mm leads. The male rod end (-B) makes it easy to fit Koganei cylinder joints, rod end knuckles or a nut-mounted tool directly to the piston rod. On the ZE235 the lead wire exits at right angles to the body, which helps where there is no room to run the cable along the cylinder.
What the Part Number Means
- C – Koganei Jig Cylinder C Series
- DA – Double acting
- S – Cylinder with built-in magnet for sensor switches
- 25 – Ø25 mm bore
- 50 – 50 mm stroke (a standard stroke for Ø25)
- -B – Male thread rod end (the standard version, without code, has a female thread)
- -ZE235 – 2-lead solid-state sensor switch with indicator lamp, DC10–28 V, vertical lead wire
- A – 1000 mm lead wire
- 2 – Two sensor switches included
Compact Design for Small Machines
The Jig Cylinder C Series is Koganei’s short, square-body cylinder range, built to save space in jigs, fixtures and small automation units. It mounts directly with through bolts or screws into the body, and foot and flange brackets are available as options. The Ø25 size comes in non-ion specification as standard, so it does not use materials that release copper ions.
Key Specifications (Koganei Jig Cylinder C Series Catalogue, Ø25)
Cylinder
- Operation: double acting, compressed air
- Operating pressure range: 0.1–1.0 MPa
- Proof pressure: 1.5 MPa
- Operating temperature: 0–60 °C
- Operating speed: 30–500 mm/s
- Cushion: none as standard (rubber bumper available as option -R)
- Lubrication: not required (if used, Turbine Oil Class 1, ISO VG32 or equivalent)
- Port size: M5×0.8
- Piston rod: Ø12 mm
- Rod end: male thread M10×1.25, thread length 15 mm
- Theoretical thrust at 0.5 MPa: push 245.3 N / pull 188.8 N
- Body: 40 mm square, overall length 105 mm (body 81 mm)
- Mass: approx. 293 g including the two ZE235A sensor switches (catalogue value for the female thread version; the male rod end adds a few grams)
Sensor Switches (×2)
- ZE235: 2-lead wire, solid state, indicator lamp, DC10–28 V
- Lead wire: vertical, 1000 mm (A)
- Each switch with A lead adds about 15 g
Options in the C Series (Ø25)
- No rod end code: female thread rod end (M6×1)
- -R: rubber bumper
- -G: centering location on the rod cover
- -1 / -3: foot or flange mounting bracket
- Cylinder joints and rod end accessories for the M10×1.25 male thread
- Other standard strokes for Ø25: 5, 10, 15, 20, 25, 30, 35, 40, 45, 75 and 100 mm
- B lead version (3000 mm): CDAS25X50-B-ZE235B2
Typical Applications
- Pushers and stoppers with a tool or pad fitted to the rod end
- Mechanisms connected through a cylinder joint or knuckle
- Installations with little space along the cylinder for cable routing
- Applications that need end-of-stroke feedback
Buy the Koganei CDAS25X50-B-ZE235A2 from Atlantech Drives
Atlantech Drives supplies the Koganei CDAS25X50-B-ZE235A2 with fast worldwide shipping and a 12-month warranty. Our experienced sales team can also quote other C Series bores, strokes, rod ends and sensor options. Request a quote today for price and availability.
