Koganei SGA25X50-ZE135B2 Jig Cylinder with Guides – Ø25 mm, 50 mm Stroke
The Koganei SGA25X50-ZE135B2 is a double-acting jig cylinder with guides from the Koganei SGDA Series. Koganei’s official order code for this model is SGDA25X50-ZE135B2. It combines a Ø25 mm cylinder with two guide rods in a square, thin body. It is supplied with two ZE135 solid-state sensor switches with 3000 mm lead wires. Koganei designs the SGDA Series for conveyor line stoppers, lifters and pushers.
What the Part Number Means
- SG(D)A – Koganei jig cylinder with guides, double-acting (official code: SGDA)
- 25 – Ø25 mm bore
- 50 – 50 mm stroke
- No “Q” – slide bearing type guide rods
- -ZE135 – 2-lead solid-state sensor switch with indicator lamp, DC10–28 V, horizontal lead wire
- B – 3000 mm lead wire length
- 2 – Two sensor switches included
Slide Bearing Version, Built for Stopper Duty
The slide bearing guide rods have high wear resistance, so Koganei recommends this version for applications with lateral impact loads, such as conveyor stoppers. Koganei specifies a stroke of 50 mm or less for stopper use, which this model meets. The rolling bearing version (SGDAQ) is intended for pushers and lifters and cannot be used as a stopper.
Key Specifications (Koganei SGDA Catalogue, Ø25)
Cylinder
- Operation: double-acting, compressed air
- Operating pressure range: 0.1–1.0 MPa
- Proof pressure: 1.5 MPa
- Operating temperature: 0–60 °C
- Operating speed: 100–500 mm/s
- Cushion: rubber bumper
- Lubrication: not required (if used, Turbine Oil Class 1, ISO VG32 or equivalent)
- Port size: Rc1/8
- Piston rod: Ø12 mm; guide rods: Ø16 mm (slide bearing)
- End plate non-rotation accuracy: ±0.07°
Performance at 0.5 MPa
- Theoretical thrust: 245.3 N push / 188.8 N pull
- Allowable lateral load at 50 mm stroke: 55 N
- Allowable twisting torque of the end plate at 50 mm stroke: 0.87 N·m
Sensor Switches (×2)
- ZE135: 2-lead wire, solid state, indicator lamp, DC10–28 V
- Lead wire: horizontal exit, 3000 mm (B)
- Magnet for sensor switches built in as standard on all SGDA models
Mass
- Approx. 1,253 g: 642 g zero-stroke mass, plus 10.81 g per mm of stroke, plus 35 g for each ZE135B switch
Series Features
- Square, thin body with four mounting options: top, bottom, side and T-slot
- Piping from two directions for flexible machine layout
- Sensor switches embedded in the body, with no protrusions
- Non-ion design with no copper materials, suitable for CRT manufacturing lines
- SGDA family options include rolling bearing, scraper, stroke adjusting, end keep and clean system versions
Typical Applications
- Conveyor line stoppers
- Workpiece lifters
- Pushers on assembly and transfer lines
- Jig and fixture positioning
Buy the Koganei SGA25X50-ZE135B2 from Atlantech Drives
Atlantech Drives supplies the Koganei SGA25X50-ZE135B2 (SGDA25X50-ZE135B2) with fast worldwide shipping and a 12-month warranty. Our experienced sales team can also quote other SGDA bore, stroke, bearing and sensor combinations. Request a quote today for price and availability.
More Koganei Jig Cylinders
- SGA25X50-ZE135A2 Koganei Jig Cylinder with Guide
- SGA20X30-ZE135B1 Koganei Jig Cylinder with Guide
- SGA16X20-ZE135A1 Koganei Jig Cylinder with Guide
- CDAS25X15-B-ZE135B2 Koganei Jig Cylinder
- CDAS32X20-R-ZE235A2 Koganei Jig Cylinder
- All Koganei products
Manufacturer website: Koganei Corporation
Keyword Synonyms
- SGA25X50-ZE135B2 / SGA25×50-ZE135B2 / SGA25X50ZE135B2
- SGDA25X50-ZE135B2 / SGDA25×50-ZE135B2
- Koganei SGDA25X50 jig cylinder with guides
- Koganei guided cylinder 25 mm bore 50 mm stroke
- Koganei conveyor stopper cylinder Ø25
- Koganei SGDA slide bearing cylinder with ZE135 sensors
- Koganei guide jig cylinder SGDA series
- コガネイ ガイド付ジグシリンダ SGDA25X50-ZE135B2
