XS7D1A1PAL2 Telemecanique Sensors – Inductive Proximity Sensor, Flat Form 80 × 80 × 26 mm, Sn 40 mm, PNP NO
The XS7D1A1PAL2, also written XS7-D1A1PAL2, is a general-purpose inductive proximity sensor in the Telemecanique Sensors XS range (formerly OsiSense XS). It has a compact flat 80 × 80 × 26 mm PBT plastic housing and a nominal sensing distance of 40 mm. It detects metal targets without contact, which makes it a good fit for machines that need long-range detection from a low-profile, flush-mountable body.
Key Characteristics of the XS7D1A1PAL2
- Sensor type: inductive proximity sensor, XS7 general-purpose series
- Format: flat form D, 80 × 80 × 26 mm, fixed body
- Nominal sensing distance (Sn): 40 mm
- Sensing range: over 15 mm up to 40 mm
- Detection face: frontal
- Mounting: flush mountable
- Output: 3-wire DC, PNP, 1 NO (normally open)
- Supply voltage: 12–24 V DC with reverse polarity protection
- Switching capacity: ≤ 100 mA DC, with overload and short-circuit protection
Electrical Performance and Response Times
| Parameter | Value |
|---|---|
| Switching frequency | ≤ 100 Hz |
| No-load current consumption | ≤ 10 mA |
| Voltage drop (closed state) | < 2 V |
| Differential travel | 1–15% of Sr |
| First-up delay | 30 ms |
| Response delay | 5 ms |
| Recovery delay | 35 ms |
A yellow status LED shows the output state for quick visual checks on the machine.
Pre-Wired 2 m PVC Cable Connection
The XS7D1A1PAL2 comes pre-wired with a 2 m PVC-insulated cable (3 × 0.34 mm²), ready to connect straight to a PLC input or control circuit.
Housing, Sealing and Environmental Resistance
- Enclosure and front face material: PBT
- Degree of protection: IP68 with double insulation (IEC 60529)
- Shock resistance: 50 gn for 11 ms (IEC 60068-2-27)
- Vibration resistance: 25 gn, ±2 mm amplitude, 10–55 Hz (IEC 60068-2-6)
Approvals and Conformity
The sensor is CE marked and certified UL, CSA, C-Tick and Ecolab. Telemecanique Sensors publishes EU and UK declarations of conformity, along with RoHS and REACH declarations, for this reference.
Related Reference in the Same Family
If your application needs a normally closed output, the equivalent PNP NC version in the same 80 × 80 × 26 mm flat housing is the XS7D1A1PBL2.
Buy the XS7D1A1PAL2 Telemecanique Sensors from Atlantech Drives
Atlantech Drives supplies genuine, new Telemecanique Sensors XS7D1A1PAL2 inductive sensors with fast worldwide shipping. Our senior commercial team will confirm the exact reference, quantities and lead times with you, whether you need a single replacement or a batch for machine production. Request a quote today and get a quick, competitive offer.
