DP-101-E-P Panasonic Digital Pressure Sensor – −100 to +100 kPa, 2 PNP Outputs, G 1/8 Port
The Panasonic DP-101-E-P is a dual-display digital pressure sensor from the DP-100 series for non-corrosive gas. It covers vacuum and positive pressure from −100.0 to +100.0 kPa (gauge). This is the European-style version: its pressure port combines an M5 female thread with a G 1/8 male thread, and it has two PNP comparative outputs. That makes it a direct fit for PNP-input PLCs and G-thread pneumatic fittings, both common in Europe. The two independent outputs let one sensor monitor two thresholds at once. Typical examples are “vacuum reached” and “part lost” on a suction gripper, or a low/high window on an air supply. The 30 mm square body has a 3-color LCD that shows the current value and threshold together, and response time is selectable from 2.5 ms.
Key Features of the DP-101-E-P
- Rated pressure range −100.0 to +100.0 kPa, 500 kPa pressure withstand
- 2 PNP comparative outputs, 100 mA each, NO/NC selectable
- Output modes: EASY, hysteresis and window comparator
- Pressure port: M5 female + G 1/8 male thread
- Dual 4 + 4-digit, 3-color LCD with current value and threshold
- Response time selectable from 2.5 ms to 5,000 ms
- Repeatability ±0.1 % F.S.
- Units selectable: kPa, kgf/cm², bar, psi, mmHg, inHg
- ECO mode for reduced power consumption
- CE and UKCA marked, UL/c-UL Recognized
Technical Specifications – DP-101-E-P
| Parameter | Value |
|---|---|
| Manufacturer | Panasonic |
| Part number | DP-101-E-P |
| Series | Dual Display Digital Pressure Sensor [For Gas] DP-100 |
| Type | Standard pressure port type |
| Type of pressure | Gauge pressure |
| Rated pressure range | −100.0 to +100.0 kPa |
| Set / display range | −101.0 to +101.0 kPa (−14.64 to +14.64 psi) |
| Pressure withstand | 500 kPa |
| Applicable fluid | Non-corrosive gas |
| Supply voltage | 12–24 V DC ±10 %, ripple P-P 10 % or less |
| Power consumption | Normal: 720 mW or less (30 mA at 24 V); ECO: 480 mW STD / 360 mW FULL |
| Comparative outputs | 2 × PNP open-collector, 100 mA max., 30 V DC or less, residual voltage 2 V or less |
| Output operation / modes | NO / NC; EASY, hysteresis, window comparator |
| Hysteresis | Min. 1 digit, variable (2 digits in psi) |
| Repeatability | ±0.1 % F.S. (within ±2 digits) |
| Response time | 2.5 ms to 5,000 ms (10 steps), selectable |
| Short-circuit protection | Incorporated |
| Analog output / external input | Not available on this model |
| Display | 4 + 4 digit, 3-color LCD; refresh 250 / 500 / 1,000 ms |
| Indicators | Orange LEDs for comparative outputs 1 and 2 |
| Temperature characteristics | Within ±0.5 % F.S. (at +20 °C) |
| Protection | IP40 (IEC) |
| Ambient temperature | −10 to +50 °C (storage −10 to +60 °C) |
| Pressure port | M5 female thread + G 1/8 male thread |
| Material | PBT (glass fiber reinforced) enclosure, acrylic display, SUS303 port, nickel-plated brass mounting thread |
| Connection | Connector; CN-14A-C2 2 m cable supplied |
| Cable extension | Up to 100 m with 0.3 mm² (less than 30 m for CE/UKCA) |
| Weight | Approx. 40 g net |
DP-101-E-P or DP-101A?
Choose the DP-101-E-P when you need two PNP switching outputs and a G 1/8 port. If you need an analog 1–5 V / 4–20 mA output, an external input and an R 1/8 port, see the multifunction DP-101A (NPN).
Buy Panasonic DP-101-E-P from Atlantech Drives
Order the Panasonic DP-101-E-P with fast worldwide shipping, in single units or volumes for machine builders. Our commercial team responds quickly with price and lead time across the DP-100 range. Request your quote today.
