Koganei 200-4E2-DC24V Solenoid Valve
The Koganei 200-4E2-DC24V is a direct-acting, 5-port, 2-position, double solenoid valve from Koganei’s 200 series, suitable for inline or manifold-base mounting, with 24V DC solenoids on both sides.
Technical Specifications
Valve
- Basic model: 200-4E2 (5-port, double solenoid, 2-position)
- Media: air
- Valve width: 27 mm [1.06 in]
- Orifice size: 7.5 mm [0.295 in]
- Port size: Rc1/4 [1/4 NPT]
- Mounting: inline or block manifold
- Operating pressure range: 0.15–0.7 MPa [21.8–101.5 psi]
- Operating temperature range: 0–50°C [32–122°F]
- Maximum operating frequency: 5 Hz
- Flow rate: Cv 0.42
- Switching behaviour: switches from the opposite position (double solenoid — latches in last-commanded state)
Solenoids (DC24V, both sides)
- Rated voltage: DC24V
- Also available in AC100V/AC200V variants (same base model)
- Flywheel diode: standard on AC versions, optional on DC24V
- Caution: avoid energizing both solenoids simultaneously — the valve could fall into a neutral position
Applications
Used for pilot and main-line control of pneumatic cylinders where a latching valve is preferred — holds its last commanded position without continuous power, useful for fail-in-place applications and reducing coil duty cycle, in inline or manifold-mounted valve banks with Rc1/4 port sizing.
Related Products
- Koganei 200-4E1-DC24V (single solenoid version, same series)
- Koganei 203-4E2 (3-position version of the same series)
- Koganei 180-4E2-DC24V (compact, thin-body alternative for lower flow requirements)
Need this part or a different voltage/option configuration? Contact our sales team for stock confirmation and a fast quote.
