11128044 – Baumer O300.ER-GW1B.72N Through Beam Photoelectric Sensor, Receiver, In Stock
Buy the Baumer 11128044 (O300.ER-GW1B.72N), a miniature through beam photoelectric sensor (receiver), 10m actual range, qTeach/remote sensitivity adjustment, push-pull output, M8 4-pin connector, IP67. In stock and available for fast shipping. Get a quote today.
Key Technical Specifications
- Product Type: Photoelectric through beam sensor, O300 series (miniature)
- Article Number: 11128044
- Emitter/Receiver: Receiver
- Actual Range (Sb): 10 m
- Nominal Range (Sn): 15 m
- Sensitivity Adjustment: qTeach / remote
- Alignment / Soiled Lens Indicator: Flashing light indicator
- Light Indicator: LED yellow
- Power-On Indication: LED green
- Alignment of Optical Axis: <2°
- Response/Release Time: <0.49 ms
- Voltage Supply Range (+Vs): 10–30 VDC
- Max. Current Consumption (No Load): 40 mA
- Typical Current Consumption: 30 mA
- Voltage Drop (Vd): <3 VDC
- Output Function: Light/dark operate
- Output Circuit: Push-pull
- Connection Type: Connector M8, 4-pin
- Ambient Temperature: -30°C to +60°C
- Protection Rating: IP67
Design and Performance
Reliable Mid-Range Detection for General Automation
With a 10 m actual range and 15 m nominal range, this through beam receiver suits a broad range of general-purpose object detection applications, from conveyor gap monitoring to access point sensing.
qTeach/Remote for Fast, Flexible Sensitivity Adjustment
The qTeach/remote configuration method allows sensitivity and switching parameters to be set on-site or via remote input, simplifying commissioning and reducing setup time compared to potentiometer-based adjustment.
Visual Alignment and Contamination Alerts
A flashing light indicator alerts installers to alignment issues or a soiled lens, helping maintain reliable long-range detection performance and simplifying troubleshooting during commissioning and maintenance.
Fast Response for High-Speed Automation
With a response/release time under 0.49 ms, this sensor supports rapid object detection on fast-moving production lines and conveyor systems without missed triggers.
Push-Pull Output for Flexible Wiring Configurations
A push-pull output circuit supports both sourcing and sinking wiring configurations, simplifying integration into a wide range of PLC input types without needing a different sensor model for each polarity.
Why Buy the 11128044 From Us
- In stock and ready for immediate dispatch
- Fast shipping on every order
- Commercial advisory support to help you confirm compatibility with your O300 through beam emitter unit
- Competitive pricing — get a quote in minutes
