Purchase now the 1794-OB16P, a high-density 16-point digital sourcing output module featuring integrated electronic short-circuit protection. This module is designed for the Allen-Bradley FLEX I/O system, providing a robust interface between your control logic and 24V DC field devices, ensuring maximum uptime by protecting individual channels from wiring faults.
What Is the 1794-OB16P?
The 1794-OB16P is a specialized version of the standard sourcing output module that incorporates electronic protection. Unlike standard modules that might require external fusing, the 1794-OB16P detects overcurrent and short-circuit conditions on a per-channel basis. When a fault is detected, the module automatically shuts down the affected output to prevent internal hardware damage, while allowing the remaining channels to continue operation without interruption. This makes it ideal for critical industrial applications where troubleshooting must be localized and rapid.
Key Technical Specifications
- Number of Outputs: 16 (Sourcing, Protected)
- Voltage Range: 10V DC to 31.2V DC
- Output Current Rating: 500mA per channel (max 8A per module)
- Short Circuit Protection: Electronic, per-channel shutdown
- On-State Voltage Drop: 0.5V DC maximum
- FLEXBus Current: 60mA
- Isolation Voltage: 50V (continuous)
Advanced Protection and Compatibility
The 1794-OB16P is compatible with various FLEX I/O terminal bases, including the 1794-TB2, 1794-TB3, and 1794-TB3S. It is designed to work seamlessly with EtherNet/IP, ControlNet, and DeviceNet adapters. The primary advantage of the ‘P’ variant is its ability to handle surge-heavy loads while maintaining strict protection thresholds, ensuring that a single faulty solenoid or sensor cable does not bring down an entire production cell.
Expert Tips
When deploying the 1794-OB16P, remember that the electronic protection is latching. Once a short circuit occurs and the module shuts down the channel, the fault must be cleared in the field, and then the output bit in the PLC must be toggled (transitioned from 1 to 0 and back to 1) or module power must be cycled to reset the protection circuit. This prevents the output from «chattering» against a permanent short circuit.
Frequently Asked Questions
Q: How do I identify which channel has a short circuit?
A: The module’s status indicators will signal a fault, and the diagnostic data word in the PLC will indicate the specific bit that has tripped due to an overcurrent event.
Q: Can I use this module with inductive loads without external suppression?
A: While the 1794-OB16P has internal clamping, it is still best practice to use flyback diodes for DC inductive loads to minimize EMI and extend the life of the output transistors.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here: https://atlantechdrives.com/manufacturers/allen-bradley/
