Procure now IC200MDL750 GE Fanuc VersaMax 32-Point Output Module
Procure now IC200MDL750 to command your factory’s actuators, solenoids, and indicators with absolute reliability. The GE Fanuc IC200MDL750 is a high-performance 32-Point Discrete Output Module designed for the VersaMax PLC system. Operating on a 24 VDC source, this module utilizes solid-state switching technology to provide 32 sourcing-type outputs. Each point is capable of handling up to 0.5 Amps, making it the ideal choice for driving standard industrial loads like motor contactors, pilot lights, and hydraulic valves. By condensing 32 control points into a single modular unit, the IC200MDL750 allows for massive I/O expansion while maintaining a clean and compact electrical cabinet. Acquiring this genuine OEM part ensures that your automated sequences are executed with the exact timing and electrical isolation required to prevent backplane corruption and extend the life of your field equipment.
Core Technical Specifications
- Part Number: IC200MDL750
- Manufacturer: GE Fanuc (Emerson)
- Series: VersaMax
- Output Type: Discrete Sourcing (PNP)
- Voltage: 18 to 30 VDC (24 VDC nominal)
- Current Capacity: 0.5 Amps per point; 8 Amps maximum per module
- Inrush Current: 2.0 Amps for 10ms
- Status Indication: 32 Individual logic-side LEDs
- Isolation: Optical isolation between backplane and field logic
Expert Installation and Inductive Load Protection Advice
When deploying the IC200MDL750 to drive inductive loads—such as large solenoid valves or heavy-duty relay coils—managing the «flyback» voltage is critical. When an inductive load is turned off, the collapsing magnetic field generates a massive reverse voltage spike. While the IC200MDL750 has internal clamping diodes, an expert installation best practice is to always install an external flyback diode (for DC) or an RC snubber (for AC) directly across the load at the field device. This dual-layer protection prevents electrical noise from traveling back through the cable and interfering with the PLC’s internal logic bus. Furthermore, since the module can output a total of 8 Amps, ensure that your 24 VDC field power supply is properly fused and that you have utilized adequate wire gauges to prevent significant voltage drops during high-simultaneity output states.
Frequently Asked Questions (FAQs)
What is the difference between Sinking and Sourcing outputs? The IC200MDL750 is a Sourcing (PNP) module, meaning it switches the positive (+24V) leg of the circuit to the load. Sourcing is the industry standard in Europe and most modern US facilities as it is safer for troubleshooting grounded circuits.
Can I use the IC200MDL750 to switch 120 VAC loads? No. This module is strictly rated for 24 VDC. Attempting to switch AC voltages through this module will cause immediate catastrophic failure of the solid-state transistors.
How is the module protected against short circuits? The IC200MDL750 features electronic short-circuit protection that will shut down an output if an overcurrent is detected. However, this is intended as a backup; primary protection should always be handled by external fusing on your field power distribution lines.
Do you need more references from this brand? Explore our full catalog of GE Fanuc here.
