Get now IC200PWR001 GE Fanuc VersaMax Power Supply Module
Get now IC200PWR001 to ensure a stable and highly regulated 24 VDC power distribution across your VersaMax PLC backplane. The GE Fanuc IC200PWR001 is a critical Expanded Power Supply Module designed to provide logic power and field power to the CPU and adjacent I/O modules in the VersaMax series. Operating on a nominal 24 VDC input, this module is capable of delivering up to 1.5 Amps of +5 VDC logic power to the backplane, supporting large-scale I/O configurations that exceed the capacity of standard embedded power supplies. Engineered for industrial resilience, the IC200PWR001 acts as a sacrificial barrier against voltage transients and electromagnetic interference (EMI), protecting the delicate microprocessors within your control system. By securing this genuine OEM component, you guarantee that your automated machinery operates with deterministic precision, avoiding the common logic faults and erratic sensor readings associated with unstable voltage rails on the factory floor.
Core Technical Specifications
- Part Number: IC200PWR001
- Manufacturer: GE Fanuc (Emerson)
- Series: VersaMax
- Input Voltage: 18 to 30 VDC (24 VDC nominal)
- Output Current: 1.5 Amps at +5 VDC (backplane logic power)
- Isolation: Optical and galvanic isolation between input and logic rails
- Protection: Short circuit, overvoltage, and reverse polarity protection
- Mounting: Clips directly onto the VersaMax CPU or Network Interface Unit (NIU)
Expert Installation and Backplane Loading Advice
When installing the IC200PWR001, the most critical step for any automation engineer is performing a comprehensive backplane current draw calculation. The VersaMax architecture is highly modular, and as you add high-density analog or communication modules, the +5 VDC current requirement increases. If the total draw exceeds 1.5 Amps, the IC200PWR001 will enter a protection mode, causing intermittent CPU resets or I/O communication failures. Furthermore, this expanded power supply should be mounted in the leftmost position of the rack to ensure optimal current distribution across the backplane traces. Ensure that the 24 VDC input wiring is shielded and routed away from high-voltage AC motor lines. A common expert tip is to install a dedicated external line filter on the 24V supply to prevent high-frequency noise from switching power supplies from bleeding into the sensitive PLC logic circuits.
Frequently Asked Questions (FAQs)
What does it mean if the PWR LED on the IC200PWR001 is off? This indicates that the module is either not receiving the 18-30 VDC input power or the internal overcurrent protection has tripped due to a short circuit on the PLC backplane. Disconnect the I/O modules one by one to isolate the fault.
Does this power supply provide 24V to the field sensors? No. The IC200PWR001 converts the 24 VDC input into the 5 VDC required for logic. While it passes through the field voltage, you must ensure your external 24V supply is adequately sized to handle both the PLC logic and the actual load of your field actuators and sensors.
Can I use this module with an AC input? No, the IC200PWR001 is strictly a DC-to-DC converter. For AC applications (120/240 VAC), you must utilize the IC200PWR101 power supply module.
Do you need more references from this brand? Explore our full catalog of GE Fanuc here.
