Procure now IC693ALG442 GE Fanuc Series 90-30 Analog Combination Module
Procure now IC693ALG442 to vastly optimize your PLC backplane space while delivering elite analog control to your continuous manufacturing processes. The GE Fanuc IC693ALG442 is a highly advanced Analog Combination Module engineered for the Series 90-30 Programmable Logic Controller (PLC). By ingeniously combining 4 high-resolution analog inputs and 2 precision analog outputs into a single, compact VME slot, this module drastically reduces hardware costs and frees up valuable backplane real estate for additional I/O. It is the perfect solution for localized PID loop control, where a single module can monitor process variables from pressure transducers or temperature sensors, and immediately output the corresponding corrective signals to proportional valves or variable frequency drives (VFDs). Operating with 12-bit digital-to-analog and analog-to-digital resolution, the IC693ALG442 ensures that your automated systems respond to minute environmental changes with absolute deterministic accuracy, guaranteeing perfect product consistency and optimal resource utilization.
Core Technical Specifications
- Part Number: IC693ALG442
- Manufacturer: GE Fanuc
- Product Series: Series 90-30 PLC
- Module Type: Analog Combination Module (Inputs and Outputs)
- Input Channels: 4 Differential Analog Inputs (-10 to +10 VDC or 4-20 mA)
- Output Channels: 2 Single-Ended Analog Outputs (-10 to +10 VDC or 4-20 mA)
- Resolution: 12-bit processing for precise signal scaling
- Update Rate: Fast 5 millisecond conversion time per channel
Expert Wiring, Shielding, and Configuration Advice
Integrating the IC693ALG442 into a noisy industrial environment requires rigorous attention to electromagnetic interference (EMI) mitigation. Analog signals operate at very low micro-currents that are easily corrupted by adjacent high-voltage AC lines. All field wiring connecting to the IC693ALG442 must utilize high-quality, twisted-pair shielded instrumentation cable. A vital installation rule is to tie the cable shields to the grounding bar at the PLC cabinet end ONLY. Do not ground the shield at the sensor end, as this will create a destructive ground loop that injects fluctuating AC noise directly into your analog readings. Furthermore, configuring this module for voltage or current is achieved through specific wiring configurations at the detachable terminal block, not via software alone. For example, to read a 4-20mA current loop, you must install jumper wires across specific terminal pairs to engage the internal 250-ohm drop resistor, which converts the current into a readable 1-5 VDC signal for the internal processor.
Frequently Asked Questions (FAQs)
Does the IC693ALG442 supply 24VDC loop power to my transmitters? No, this module does not provide internal loop power for 2-wire analog transmitters. You must wire an external, regulated 24 VDC power supply in series with the field sensors to generate the required 4-20mA current loop.
How do I resolve fluctuating or unstable input readings on this module? Unstable readings are almost universally caused by EMI or ground loops. Verify that your shield wires are grounded at one end only, ensure the analog cables cross AC power lines at strict 90-degree angles, and verify that the module’s configuration jumpers are securely tightened down on the terminal block.
Can this combination module be used in a remote expansion baseplate? Yes, the IC693ALG442 is fully compatible with both the primary CPU baseplate and remote expansion baseplates, offering excellent architectural flexibility for distributed process control setups.
Do you need more references from this brand? Explore our full catalog of GE Fanuc here.
