Procure now IC697CPX935 GE Fanuc Series 90-70 96MHz CPU Module
Procure now IC697CPX935 to inject unprecedented computational speed and memory capacity into your heavy-duty factory automation systems. The GE Fanuc IC697CPX935 is an elite, high-performance Central Processing Unit (CPU) engineered exclusively for the Series 90-70 Programmable Logic Controller (PLC) architecture. Driven by a formidable 96 MHz Intel 80486DX4 microprocessor, this single-slot VME module is designed to effortlessly execute massive ladder logic programs, complex mathematical algorithms, and high-speed boolean logic in fractions of a millisecond. Equipped with an expansive 1 Megabyte of battery-backed RAM and an integrated floating-point math coprocessor, this advanced CPU is fully capable of managing intensive PID loop calculations, extensive data array manipulations, and large-scale I/O networks simultaneously. By deploying the IC697CPX935, manufacturing facilities can significantly reduce scan times, ensuring incredibly deterministic automation control across highly demanding applications such as power generation, chemical refining, and large automotive assembly lines.
Core Technical Specifications
- Part Number: IC697CPX935
- Manufacturer: GE Fanuc
- Product Series: Series 90-70 PLC
- Processor Type: 96 MHz 80486DX4 microprocessor with integrated math coprocessor
- Memory Capacity: 1 Megabyte of battery-backed CMOS RAM
- I/O Capacity: Supports up to 12K discrete inputs/outputs and up to 8K analog points
- Communication: Standard RS-485 programming and SNP port on the front bezel
- Security Features: Three-position hardware key switch for Run, Stop, and Memory Protect modes
Expert Installation and Memory Protection Advice
When installing the IC697CPX935 into your Series 90-70 VME backplane, rigorous attention must be paid to electrostatic discharge (ESD) protection and power cycling procedures. Before inserting the CPU into Slot 1 of the main rack, ensure the backplane power supply is completely switched off. The high-density edge connectors on this CPU are highly sensitive to voltage transients during live insertion. Because this module houses 1 MB of volatile RAM, safeguarding your ladder logic program is paramount. Always verify that a fresh, tested lithium battery pack is securely plugged into the designated battery terminal on the power supply chassis. Without this battery, a momentary loss of facility power will instantly wipe the CPU’s memory, resulting in catastrophic machine downtime. Additionally, industrial professionals should always use the physical key switch to lock the PLC into ‘Memory Protect’ mode once commissioning is complete, preventing unauthorized personnel from altering critical safety parameters or machine logic over the network.
Frequently Asked Questions (FAQs)
Can the IC697CPX935 CPU handle Ethernet communication? Native Ethernet is not built directly into the front port of this CPU. To connect this high-speed processor to a modern TCP/IP factory network, you must install a dedicated Series 90-70 Ethernet Interface Module (such as the IC697CMM742) in an adjacent slot within the same rack.
How do I back up the program stored on this CPU? Program backups are executed using a programming terminal running GE Fanuc Logicmaster 90 or Proficy Machine Edition. Connect a serial cable to the front RS-485 port, upload the logic and hardware configuration from the PLC, and save it to your secure engineering drive.
What does a solid red OK LED mean on this processor? A solid red LED indicates a fatal hardware or watchdog timer fault. To troubleshoot, you must connect your programming software to read the internal fault tables. If the processor cannot be reached, the hardware itself may have suffered an internal component failure requiring replacement.
Do you need more references from this brand? Explore our full catalog of GE Fanuc here.
