Procure now: Mitsubishi Q64AD Analog Input Expansion Module
Atlantechdrives provides the Q64AD, a high-performance 4-channel analog input module for the MELSEC-Q Series. This module is essential for translating real-world process variables like temperature, pressure, and level into high-resolution digital data for your PLC processor.
- Channels: 4 Analog Inputs
- Input Range: -10 to +10V DC / 0 to 20mA DC
- Resolution: 12-bit (1/4000)
- Conversion Speed: 80 µs / channel
- Isolation: Photocoupler isolation
- Power Consumption: 0.64A @ 5V DC
Technical Performance: High-Speed Precision Data Acquisition
Order now the Q64AD to enhance the diagnostic capability of your automation system. This module is technically engineered with a 12-bit analog-to-digital converter (ADC), providing 4,000 discrete levels of data. This granularity is vital for precision chemical dosing, furnace temperature control, and hydraulic pressure monitoring. The Q64AD features advanced digital filtering functions, allowing the CPU to average signals and eliminate jitter caused by electromagnetic interference (EMI) from nearby variable frequency drives. Its 80-microsecond conversion rate ensures that even the most rapid process fluctuations are captured and processed by the CPU with minimal latency. When you secure the Q64AD, you are gaining a high-tier analog bridge that supports independent channel configuration, allowing for a mix of voltage and current inputs on a single module.
Installation Advice: Protecting Analog Signal Integrity
When installing the Q64AD, the use of double-shielded twisted-pair (STP) cabling is non-negotiable for 12-bit accuracy. Ground the shield at the entry point of the PLC cabinet only to avoid ground loops. Ensure that unused channels are shorted (in current mode) or tied to common (in voltage mode) to prevent «floating» inputs from inducing noise into the active channels. Sourcing your Q64AD from Atlantechdrives ensures you receive a unit with factory-certified calibration, maintaining the linear accuracy of your process setpoints.
Maintenance and Calibration Verification
The Q64AD is built for long-term stability, but annual calibration checks are recommended in high-precision industries. Use a certified signal generator to verify that the digital value in the PLC corresponds to the applied 4-20mA or 0-10V signal. Sourcing an authentic Q64AD from Atlantechdrives guarantees the hardware quality required for 24/7 mission-critical process control.
FAQs
Q: Does the Q64AD support thermocouple inputs directly?
A: No, the Q64AD is for standard V/I signals. For thermocouples, the Q64TD or an external signal conditioner is required.
Q: What happens if a channel goes over-range?
A: The Q64AD will trigger a buffer memory flag that the CPU can read to initiate a safety shutdown or alarm.
Do you need more references from this brand? Explore our full catalog of Mitsubishi here.
