Get now: Mitsubishi FX3U-16MT/ES-A High-Speed Compact PLC
Atlantechdrives provides the FX3U-16MT/ES-A, the flagship micro-controller of the MELSEC FX series. This unit is specifically designed for high-speed industrial automation where rapid pulse outputs and fast execution times are required in a compact DIN-rail footprint.
- I/O Count: 16 Total (8 Inputs / 8 Outputs)
- Output Type: Transistor (Sink)
- Power Supply: 100-240V AC
- Execution Speed: 0.065 µs per basic instruction
- Memory: 64,000 steps internal program memory
- High-Speed Counters: Up to 100 kHz
Technical Performance: The Benchmark in Micro-PLC Speed
Purchase now the FX3U-16MT/ES-A to leverage one of the fastest compact controllers in the industry. The FX3U architecture is technically superior, featuring a triple-bus system that allows for high-speed communication with specialty modules and high-density I/O. The 8 transistor outputs are engineered for motion control, supporting Pulse Train Output (PTO) at frequencies up to 100kHz. This allows for the direct control of up to 3 axes of independent positioning without the need for a dedicated motion controller. When you procure the FX3U-16MT/ES-A, you are gaining a processor that handles complex math and high-speed data logging with the efficiency of a much larger rack-based system, thanks to its extensive internal register set and 64k step memory.
Expert Tips: Optimizing Motion Control Pulse Integrity
For the FX3U-16MT/ES-A, using the transistor outputs for servo pulses requires careful attention to the load current. Ensure the pulse output common (COM) is short and properly gauged to prevent «ringing» in the signal. We recommend using a pull-up resistor if the drive’s input impedance is high to ensure clean edges on the 100kHz pulses. Sourcing your FX3U-16MT/ES-A from Atlantechdrives ensures you get a unit with original Mitsubishi oscillators, providing the deterministic timing required for precise multi-axis synchronization.
Maintenance and Expansion Longevity
The FX3U-16MT/ES-A is a robust solid-state device, but the real-time clock and retentive registers are maintained by an internal battery (FX3U-32BL). Maintenance protocols should include a battery check every 3 to 5 years. The module’s expandable bus allows it to grow with your application, supporting up to 256 combined I/O points. Sourcing from Atlantechdrives provides the hardware reliability and technical support required for long-term industrial operations.
FAQs
Q: What is the main difference between FX3G and FX3U?
A: The FX3U is significantly faster (0.065µs vs 0.21µs) and has higher expansion capabilities and faster pulse outputs.
Q: Can I use this for 240V AC output loads?
A: No, this unit has transistor outputs. For 240V AC, you must use the FX3U-16MR/ES-A relay version.
Do you need more references from this brand? Explore our full catalog of Mitsubishi here.
