Procure now: Mitsubishi FX5-4DA-ADP iQ-F Series Analog Expansion Module
Atlantechdrives provides the FX5-4DA-ADP, a high-precision 4-channel analog output expansion adapter designed specifically for the MELSEC iQ-F series (FX5U and FX5UC). This side-mounting adapter is critical for processes requiring proportional control signals, such as speed references for Variable Frequency Drives (VFDs) or valve positioning in fluid control systems.
- Channels: 4 Analog Outputs
- Output Range: -10 to +10V DC / 0 to 20mA DC
- Resolution: 14-bit (Voltage: 1/16000, Current: 1/16000)
- Conversion Speed: 250 µs / channel
- Isolation: Photocoupler isolation between output and PLC bus
- Connection: Direct side-adapter link
Technical Architecture: 14-bit Precision for Advanced Loop Control
Get now the FX5-4DA-ADP to achieve laboratory-grade signal generation in your industrial environment. This adapter is technically engineered with a 14-bit digital-to-analog converter (DAC), providing a high degree of granularity with 16,000 discrete levels. This resolution is vital for fine-tuning the torque of a servomotor or the pressure setpoint in a pneumatic regulator. The FX5-4DA-ADP utilizes a high-speed internal bus communication that ensures a total refresh time of 1ms for all four channels, making it a deterministic choice for rapid-response systems. When you secure the FX5-4DA-ADP, you are gaining an adapter that supports both bipolar voltage (±10V) and unipolar current (4-20mA), allowing for maximum flexibility in international machine designs without changing hardware modules.
Installation Advice: Managing Analog Grounding and Noise
When installing the FX5-4DA-ADP, it must be noted that it is a left-side expansion adapter. To maintain the 14-bit accuracy, wiring discipline is paramount. Use high-quality shielded twisted-pair cabling for all analog runs. The shield should be grounded only at the PLC chassis side to prevent ground loops that could introduce signal offsets. If you are using multiple adapters, the FX5-4DA-ADP should be placed as close to the CPU as possible to minimize bus latency. Sourcing your FX5-4DA-ADP from Atlantechdrives ensures you receive a unit with factory-certified analog reference circuits, protecting the stability of your command signals.
Maintenance and Signal Calibration Checks
The FX5-4DA-ADP is a solid-state component, but its internal DACs can be sensitive to thermal drift over many years of service. Maintenance protocols should include a yearly verification of the 0V and 10V (or 4mA and 20mA) span using a calibrated multimeter. In GX Works3, you can use the offset and gain functions to calibrate the module if cabling resistance is affecting the field-side accuracy. Sourcing an authentic FX5-4DA-ADP from Atlantechdrives guarantees the hardware integrity required for 24/7 mission-critical process control.
FAQs
Q: Does the FX5-4DA-ADP require external 24V DC?
A: Yes, it requires an external 24V DC power supply connection to drive the analog output circuitry.
Q: Can I output voltage and current simultaneously?
A: Yes, each of the four channels is independently software-configurable for either voltage or current.
Do you need more references from this brand? Explore our full catalog of Mitsubishi here.
