Get now: Mitsubishi HG-RR153 AC Servo Motor – MELSERVO-J4 Series
Atlantechdrives provides the HG-RR153, a high-performance rotary servo motor designed for high-power, low-inertia applications within the MELSERVO-J4 ecosystem. This motor is engineered for high-frequency acceleration and deceleration, making it the primary choice for high-speed material handling and printing machinery.
- Rated Output: 1.5 kW
- Rated Speed: 3000 r/min
- Maximum Speed: 6000 r/min
- Inertia: Low Inertia
- Encoder: 22-bit Absolute (4,194,304 pulses/rev)
- IP Rating: IP67 (excluding shaft through-part)
Technical Architecture: High-Resolution Feedback and Thermal Efficiency
Purchase now the HG-RR153 to achieve unparalleled precision in your motion control system. This motor features a 22-bit high-resolution absolute encoder, which allows for smooth rotation and superior positioning accuracy even at low speeds. The low-inertia design is technically optimized for rapid-cycle tasks, significantly reducing the settling time in high-speed pick-and-place applications. The HG-RR153 utilizes high-grade rare earth magnets and a specialized stator winding technique that minimizes energy loss and heat generation. When you procure the HG-RR153, you are investing in a motor that integrates seamlessly with MR-J4-B and MR-J4-A amplifiers, leveraging the SSCNET III/H high-speed optical fiber network for deterministic control.
Expert Tips: Optimizing Load Inertia Ratios
For the HG-RR153, maintaining a proper load inertia ratio is critical. Although this motor is rated for low inertia, we recommend a ratio of 5:1 or lower for high-dynamic applications to prevent oscillation and reduce mechanical stress on the coupling. Sourcing your HG-RR153 from Atlantechdrives ensures you get a unit with factory-balanced rotors, which is vital for maintaining the 3000 r/min rated speed without excessive vibration. Always use original Mitsubishi high-flex cables for the encoder and power connections to maintain the IP67 environmental seal.
Maintenance and Bearing Longevity
Maintenance of the HG-RR153 involves monitoring the shaft seals and checking for bearing noise during high-speed operation. The internal 22-bit encoder is sensitive to magnetic interference; ensure the motor is properly grounded to the drive chassis. Sourcing from Atlantechdrives provides the hardware reliability and precision required for 24/7 industrial uptime.
FAQs
Q: Does the HG-RR153 include an electromagnetic brake?
A: This specific part number does not include a brake. For the brake version, look for HG-RR153B.
Q: Can I use this motor with an MR-J3 amplifier?
A: No, the HG series is specifically designed for the MR-J4 and MR-J5 series amplifiers.
Do you need more references from this brand? Explore our full catalog of Mitsubishi here.
