Purchase now: Allen-Bradley 1763-NC01 MicroLogix Communication Cable
Atlantechdrives provides you the 1763-NC01, a specialized interface cable designed to facilitate DH-485 networking for the MicroLogix 1100 controller series. This cable is essential for connecting the 8-pin mini-DIN port (Channel 0) of the controller to a DH-485 network via the 1761-NET-AIC converter or for direct peer-to-peer connections with other compatible devices.
- Connectors: 8-pin Mini-DIN to 6-pin Phoenix (Terminal Block)
- Protocol: DH-485 / RS-485 compatible
- Length: 30 cm (approx. 11.8 inches)
- Function: Network interface/Port expansion
- Compatibility: MicroLogix 1100 (1763) and AIC+ modules
Technical Engineering: High-Integrity Network Linking
The 1763-NC01 is engineered to ensure stable and noise-immune data transmission within a DH-485 industrial network. In complex automation environments, serial communication can be compromised by electromagnetic interference (EMI). The 1763-NC01 utilizes high-grade shielding and precise pinout configurations to prevent packet loss during critical data exchanges between controllers or between a PLC and an HMI. This cable acts as a bridge, allowing the MicroLogix 1100 to communicate over longer distances by converting its serial port into a format compatible with RS-485 trunk lines. Its short, robust design is ideal for mounting within a single control cabinet, ensuring that signal degradation is minimized between the processor and the network interface module.
Installation Advice: Pin Protection and Shielding
When installing the 1763-NC01, pay close attention to the 8-pin mini-DIN end. These pins are highly sensitive to mechanical stress; ensure the connector is aligned with the notch on the PLC port before applying force. For the 6-pin Phoenix end, ensure that the stripped wire leads are securely fastened but not over-tightened to avoid shearing. To maintain the highest level of noise immunity, we recommend that the DH-485 trunk shield is properly grounded at one point only. If you are experiencing «Node Not Found» errors, verify the continuity of the 1763-NC01, as industrial vibration can occasionally cause the internal wires to fatigue near the connector molding.
Maintenance and Lifecycle Diagnostics
The 1763-NC01 is a passive industrial component, but its role in network health is vital. Maintenance protocols should include a yearly visual inspection of the connector pins for oxidation or dust buildup. Use a specialized electronics contact cleaner if the cable is deployed in a high-humidity or oily environment. Since a faulty cable can disqualify a node from the network, keeping a spare 1763-NC01 on-site is a standard practice for reducing Mean Time to Repair (MTTR). Sourcing an authentic Allen-Bradley 1763-NC01 from Atlantechdrives guarantees that the electrical impedance matches the original port specifications, preventing communication timeouts.
FAQs
Q: Can I use the 1763-NC01 for programming the PLC?
A: This cable is primarily for network interfacing (DH-485). For PC programming via RS-232, the 1761-CBL-PM02 is the standard tool.
Q: Is the 1763-NC01 compatible with MicroLogix 1400?
A: While the 1400 has a similar port, the 1763-NC01 is specifically optimized for the 1763 (ML1100) hardware architecture.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here.
This 8-pin mini-DIN to terminal block cable simplifies the connection between sensors and your 1763-L16BBB controller.
