Purchase now: Allen-Bradley 1762-IQ8 MicroLogix Expansion Input Module
Atlantechdrives provides you the 1762-IQ8, a reliable 8-point discrete DC input module for the MicroLogix 1100, 1200, and 1400 expansion bus. This module is the perfect entry-level expansion for small machines and panels where only a few additional 24V DC sensing points are needed, providing a cost-effective way to scale your control system.
- Inputs: 8 Digital DC Inputs
- Operating Voltage: 10-30V DC (24V Nominal)
- Logic Type: Sinking/Sourcing
- On-State Voltage: 10V DC (min)
- Bus Draw: 50 mA @ 5V DC
Technical Performance: Reliable Low-Density Sensing
The 1762-IQ8 is engineered to provide the same industrial durability as higher-density modules but in a 8-point format. It features high-speed opto-couplers that isolate the field circuitry from the backplane, ensuring that voltage spikes on the sensor lines do not reach the controller’s logic engine. This module is particularly popular for simple pump control, valve position feedback, and small conveyor units. Its 8 inputs are software-configurable for various filter times, allowing it to adapt to both slow-moving mechanical switches and high-speed electronic sensors. The 1762-IQ8’s low power consumption makes it an ideal choice for systems already operating near the limit of the MicroLogix internal power supply capacity.
Installation Advice: Wiring for Maximum Integrity
When wiring the 1762-IQ8, use 18-22 AWG copper wire and ensure a clean strip length for the terminal screws. Because the module is non-isolated between channels (they share a common point), you must ensure that all sensors in the group are powered from the same 24V DC source. We recommend using a dedicated, filtered DC power supply for the I/O to avoid noise from VFDs or large motors. If you are mounting the 1762-IQ8 in a high-vibration environment, use the DIN-rail locking mechanism to prevent the expansion bus from separating, which could cause the PLC to go into a «Fatal I/O Fault» mode.
Maintenance and Long-Term Value
The 1762-IQ8 requires minimal maintenance. Annual checks of the screw terminal tightness and a visual inspection of the status LEDs are usually sufficient. If an input channel stops responding, check the sensor’s LED first; if the sensor is active but the 1762-IQ8 LED is dark, use a jumper to briefly apply 24V directly to the module’s terminal to confirm if the internal opto-isolator is still functioning. By choosing original 1762-IQ8 parts from Atlantechdrives, you are opting for a component with a proven track record in thousands of industrial applications, ensuring your small automation projects stay online indefinitely.
FAQs
Q: Can the 1762-IQ8 be used with 24V AC signals?
A: No, the IQ8 is strictly for Direct Current (DC). For AC signals, you must use the 1762-IA8.
Q: What is the maximum RPI I can set for this module?
A: The Requested Packet Interval (RPI) can be set as low as 1ms, though the hardware input filter will determine the actual response speed.
Do you need more references from this brand? Explore our full catalog of Allen-Bradley here.
