Order now the Kuhnke 3084860 — Atlantechdrives provides you with this genuine Kuhnke component referenced by internal part number 3084860, sourced through authorised Kendrion/Kuhnke distribution channels for maintenance, OEM replacement, and spare part applications across Kuhnke-equipped industrial systems.
What Is the Kuhnke 3084860?
The 3084860 is a Kuhnke (Kendrion) component identified by its numeric internal part code — a catalogue format used by Kuhnke to reference spare parts, sub-assemblies, accessory components, and replacement modules that are ordered to service installed Kuhnke products rather than as standalone catalogue items in the standard alphanumeric series notation. Kuhnke numeric part codes in the 3xxxxxxx range typically correspond to components such as replacement solenoid coils (ordered by internal coil code rather than by valve series), seal and O-ring service kits, DIN connector assemblies and cable gland hardware, valve sub-base end plates and manifold accessories, and complete replacement sub-assemblies for Kuhnke relay, solenoid, or pneumatic valve products. The 3084860 sits within this numeric spare parts catalogue and represents a specific, precisely defined component that must be ordered by this exact reference to guarantee compatibility with the parent Kuhnke product it services. Attempting to identify or substitute the 3084860 by description alone — without the exact part number — risks receiving a dimensionally or materially incompatible component, which is particularly critical for sealing components, electrical coils, and precision mechanical sub-assemblies where even minor deviations from specification cause premature failure or unsafe operation.
Key Technical Specifications
- Manufacturer: Kuhnke (Kendrion group)
- Part number: 3084860 (Kuhnke internal numeric spare parts catalogue)
- Component type: Genuine Kuhnke spare part / sub-component / replacement module — consult Kuhnke spare parts documentation or installed equipment BOM for exact component definition
- Application: Maintenance replacement or OEM spare for Kuhnke-equipped industrial systems
- Compatibility: Specific to the Kuhnke product family defined in the 3084860 spare parts record
- Ordering requirement: Must be ordered by exact part number 3084860 — substitution by description is not recommended
- Supply chain: Sourced through authorised Kuhnke/Kendrion distribution — genuine parts only
Compatibility and Applications
The Kuhnke 3084860 is applicable wherever the installed Kuhnke equipment’s service documentation or BOM specifies this part number as a replacement component. Kuhnke numeric spare parts in this format are used across the full Kuhnke product portfolio and may apply to any of the following product families depending on the specific component: Kuhnke solenoid valve series (41, 46, 64, 68, 76, 77, 84 and other series) — coil replacements, seal kits, spool assemblies, and manifold accessories. Kuhnke relay and switching modules (RM series) — contact modules, socket accessories, and coil sub-assemblies. Kuhnke linear solenoid actuators (UF series) — plunger assemblies, return springs, and mounting hardware. Kuhnke pneumatic valve manifolds — pressure zone separators, blanking plates, end plates, and sealing kits for multi-station manifold assemblies. To confirm the exact product family and component type for 3084860, cross-reference with the Kuhnke equipment service manual or contact Atlantechdrives with any additional context about the parent product.
Maintenance Tips
Effective use of Kuhnke numeric spare parts like the 3084860 in a planned maintenance programme requires the following practices: Before a scheduled maintenance shutdown, verify stock availability of all Kuhnke numeric spare parts required for the planned service — numeric-code spares are not always held in general industrial distribution and sourcing delays at maintenance time cause extended downtime. Atlantechdrives maintains dedicated Kuhnke spare parts stock precisely to address this risk. When removing the component to be replaced, photograph it in situ before disassembly, documenting orientation, cable routing, and any adjacent components — this reference is invaluable during reassembly, particularly for sub-assemblies with multiple orientations. For sealing components (O-rings, diaphragms, gaskets), always fit the replacement immediately after removing the worn part and clean the mating surfaces with a lint-free cloth before installation — debris on sealing faces is a leading cause of immediate post-maintenance leaks. For coil replacements identified by a 3xxxxxxx Kuhnke part number, verify the replacement coil voltage against the control circuit voltage before energising — the parent product BOM will specify the coil voltage, and an incorrect voltage coil fitted with the correct part number appearance will either fail to actuate (low voltage) or burn out immediately (high voltage). Record the 3084860 replacement date and component location in your maintenance management system — this creates a service history that supports future spare parts planning and mean time between replacement analysis.
Frequently Asked Questions
Q: How do I find out exactly what the Kuhnke 3084860 is before placing an order?
A: The definitive source is the spare parts list or service manual supplied with the original Kuhnke equipment, where 3084860 will appear in the BOM with a description, quantity, and installation reference. If original documentation is unavailable, contact Atlantechdrives with the part number and any available information about the parent Kuhnke product — our technical team can identify the component from the Kuhnke spare parts catalogue and confirm it matches your application before order placement.
Q: Is the Kuhnke 3084860 a consumable service item or a long-life structural component?
A: Without the specific component definition, this cannot be stated with certainty. However, Kuhnke numeric spare parts typically fall into two categories: consumable service items (seal kits, O-rings, coils) that are replaced at defined service intervals or on failure, and long-life structural components (sub-bases, manifold hardware, mechanical sub-assemblies) that are replaced only on damage or wear. Consult the Kuhnke service documentation for the parent product to determine the recommended replacement interval for 3084860 in your specific application.
Q: Can Atlantechdrives supply the Kuhnke 3084860 with a certificate of conformance or material traceability documentation?
A: Yes. Atlantechdrives sources all Kuhnke components through authorised distribution channels and can provide certificate of conformance documentation confirming genuine Kuhnke origin on request. For applications requiring full material traceability — such as certified machinery, safety-rated circuits, or regulated process equipment — request traceability documentation at the time of ordering to ensure it is included with the delivery.
Do you need more references from this brand? Explore our full catalog of Kuhnke here: https://atlantechdrives.com/manufacturers/kuhnke/
