Purchase now: Winner EP-08W-2A-01-Z-05-H Cartridge Valve
Purchase now: Atlantech Drives provides you the Winner Hydraulics EP-08W-2A-01-Z-05-H, a premium Solenoid Operated Poppet Valve. This model is designed for critical safety applications in industrial hydraulic systems. It fits into a standard Size 08 cavity and operates as a 2-Way, Normally Closed (NC) blocking valve. The key feature of this specific part number is the Manual Override («H»), combined with a 24V DC Coil («05»), making it the standard choice for factory automation and heavy machinery where emergency release capabilities are mandatory.
Technical Specifications and Safety Override
The «EP» series utilizes a Poppet Design, which ensures extremely low leakage (drops per minute) compared to spool valves, making it ideal for holding a cylinder in position without drift. The Manual Override allows a technician to physically push or pull a knob to open the valve if the electrical system fails (e.g., during a power outage), ensuring a safe lowering of loads. The valve body is Zinc Plated («Z») for corrosion resistance and is rated for pressures up to 350 Bar (5000 PSI).
- Part Number: EP-08W-2A-01-Z-05-H.
- Type: Electro-Poppet (Zero Leak).
- Function: 2-Way, Normally Closed.
- Voltage: 24V DC (Industrial Standard).
- Feature: Manual Override (Hand Knob).
- Cavity: C-08-2 (Size 08).
- Flow: Max 30 LPM.
- Coil: Included (Size 08 Coil).
- Protection: IP65 (with connector).
Expert Tips: Emergency Procedures
Know your override. Expert Tip: The «H» style manual override is a lifesaver, but it can be dangerous if misused. Unlike a solenoid that snaps shut when power is cut, some manual overrides can be «locked» in the open position (check if it’s a twist-lock or spring-return type). Always ensure the manual override is fully disengaged (popped out) before restarting the hydraulic pump, otherwise, the system will not build pressure, leading to confusing troubleshooting.
Frequently Asked Questions (FAQs)
Q: Can I use this for load holding?
A: Yes, absolutely. The Poppet design is specifically meant for load holding because it seats metal-on-metal with virtually zero leakage.
Q: What if I need 12V instead of 24V?
A: You must change the coil. The cartridge is the same, but putting 12V on this «05» (24V) coil will not generate enough magnetic force to open the valve.
Do you need more references from this brand? Explore our full catalog of Winner here.
