Purchase now: Weidmüller 2698400000 Feed-through Terminal
Purchase now: Atlantech Drives provides you the Weidmüller 2698400000 (Model: A2C 2.5), the standard **Feed-through Terminal Block** from the innovative **Klippon® Connect A-Series**. This beige terminal is the bread-and-butter of modern control cabinet wiring. It features Weidmüller’s proven **PUSH IN** connection technology, allowing for the direct insertion of solid wires or ferruled conductors without tools. It is rated for a nominal cross-section of **2.5 mm²** and a current of **24 A**, making it suitable for the vast majority of control and signal circuits.
Technical Specifications and Compact Design
The A2C 2.5 is designed for maximum space saving. With a width of only **5.1 mm**, it allows for high packing density on the TS 35 DIN rail. The PUSH IN spring guarantees a vibration-proof, gas-tight connection that does not loosen over time, eliminating the need for periodic screw re-tightening maintenance. It features a test point for standard 2.0 mm test probes and supports pluggable cross-connectors (jumpers) for easy potential distribution.
- Part Number: 2698400000.
- Model: A2C 2.5.
- Type: Feed-through terminal.
- Connection: PUSH IN technology.
- Wire Size: 0.14 … 2.5 mm² (AWG 28…12).
- Voltage: 800 V (IEC).
- Current: 24 A (IEC) / 20 A (UL).
- Width: 5.1 mm.
- Color: Dark Beige (Wemid).
- Flammability: V-0 (UL 94).
Expert Installation Advice: Preparing the Wire
Speed is key, but quality is king. Expert Tip: To get the full benefit of PUSH IN speed, use **crimped ferrules** with plastic collars. If you use flexible stranded wire without a ferrule, you must use a screwdriver to open the spring contact. With a ferrule, you just push it in. Ensure the strip length is exactly **10 mm**; too short and the insulation enters the spring (bad contact), too long and live copper is exposed (safety hazard).
Frequently Asked Questions (FAQs)
Q: Can I bridge non-adjacent terminals?
A: Yes, the ZQV 2.5 cross-connectors allow you to break out pins to skip terminals, creating complex bridging patterns easily.
Q: Is it compatible with older Z-Series?
A: Mechanically yes (fits on rail), but accessories (jumpers, markers, end plates) are NOT compatible. You must use A-Series accessories.
Do you need more references from this brand? Explore our full catalog of Weidmüller here.
