Purchase now: Weidmüller KT 45 R Cable Cutter
Purchase now: Atlantech Drives provides you the Weidmüller 9023100000 (Model: KT 45 R), a professional **Ratchet Cable Cutter** designed for the effortless cutting of copper and aluminium cables. This tool is capable of slicing through cables with an outer diameter of up to **45 mm** (approx. 300 mm² cross-section depending on stranding). The «R» stands for **Ratchet Mechanism**, which allows the user to cut thick cables using one hand by pumping the handle, multiplying the cutting force significantly compared to standard leverage cutters.
Technical Specifications and Blade Geometry
The KT 45 R features specially hardened precision blades that cut smoothly and cleanly without crushing or deforming the conductor. This is vital for ensuring the cable fits into lugs or terminals afterwards. The tool is suitable for stranded copper and aluminium cables but **NOT** for steel wire, wire rope, or ACSR (Aluminium Conductor Steel Reinforced), which would damage the blades. The handles are insulated with multi-component grips for comfort and safety.
- Part Number: 9023100000.
- Model: KT 45 R.
- Max Diameter: 45 mm.
- Max Cross-section: ~300 mm² (Cu/Al).
- Mechanism: Ratchet (One-handed operation).
- Release: Quick release lever.
- Weight: Approx 740 g.
- Length: 260 mm.
- Application: Cu/Al cables (Not Steel).
Expert Maintenance Tips: Blade Release
Stuck on a hard cable? Expert Tip: If you start cutting a cable and realize it’s too hard or contains steel (forbidden!), do not force it. The KT 45 R has a **Emergency Release Lever** near the pivot point. Pushing this lever disengages the ratchet pawl, allowing the blades to open instantly so you can remove the tool. Forcing the handles when stuck will likely chip the cutting edge.
Frequently Asked Questions (FAQs)
Q: Can I sharpen the blades?
A: The blades are replaceable (Spare part: ERME KT 45 R). While sharpening is possible by a specialist, replacing the blade set restores original factory geometry for clean cuts.
Q: Is it insulated for 1000V?
A: No, standard KT 45 R handles are plastic dipped for comfort but **NOT VDE certified** for live working. Always de-energize cables before cutting!
Do you need more references from this brand? Explore our full catalog of Weidmüller here.
