Purchase now: Wittenstein NP015F-MF1-10-1B1-1S Gearbox
Purchase now: Atlantech Drives provides you the Wittenstein Alpha NP015F-MF1-10-1B1-1S. This is a specialized version of the **Size 015 Planetary Gearbox**. The **»F»** in the type code (NP015**F**) typically designates a variant optimized for specific environmental conditions, often **Food-Grade** suitability or enhanced **Corrosion Resistance** within the alpha Basic Line. With a **Ratio of 10:1**, it is the perfect torque multiplier for packaging lines in the food, beverage, or pharmaceutical industries where standard aluminum gearboxes might corrode or fail hygiene inspections.
Technical Specifications and Hygienic Features
The NP015F is designed to withstand washdown procedures better than the standard ‘S’ series. It likely features **Food-Grade Lubrication (NSF H1)** and stainless steel output components or specialized coatings. The **»-1B1″** interface connects seamlessly to compatible motors. The gearbox maintains the high torque density of the NP series but adds the reliability needed for «Clean» production environments. It is ideal for driving capping heads, conveyors in wet areas, or blister packaging mechanisms.
- Part Number: NP015F-MF1-10-1B1-1S.
- Variant: F (Food/Corrosion Resistant).
- Size: 015.
- Ratio: 10 (i=10).
- Input Interface: Code 1B1.
- Lubrication: Food Grade Grease (Verify H1 spec).
- Shaft: Corrosion Resistant / Stainless.
- Protection: Enhanced (IP65 typ.).
Expert Maintenance: Washdown Caution
High pressure kills seals. Expert Tip: Even with an «F» rated gearbox (Food/Corrosion resistant), never aim a high-pressure jet (100 bar+) directly at the shaft seals (Input or Output). The water pressure can force the seal lip open, allowing water to enter and emulsify the grease inside. Always clean gently around the seals or use shields. If water gets in, the gearbox will fail within weeks.
Frequently Asked Questions (FAQs)
Q: Is this fully Stainless Steel?
A: Usually, the «F» variant in the Basic Line uses specialized coatings or stainless components on exposed parts, but it is not a full «Hygienic Design» (HDV) stainless steel gearbox. It is a cost-effective alternative for «Splash Zones». For direct food contact, check the full HDV series.
Q: Does it use standard grease?
A: No, «F» models are typically filled with Food-Grade (H1) grease at the factory to comply with FDA/USDA regulations in case of accidental leakage.
Do you need more references from this brand? Explore our full catalog of Wittenstein here.
