00041348 Bürkert: Precision Repair for DN13 Solenoids
The 00041348 (short code **41348**) is the dedicated Wearing Part Set for the smaller DN13 (1/2-inch) versions of the Bürkert **Type 0281** and **Type 0255** solenoid valves. These smaller valves are often used in pilot control lines or lower-flow cooling circuits. The kit contains the high-precision diaphragm required to maintain the servo-assist function. Since these valves rely on a pressure differential to operate, even a small pinhole in the main diaphragm can equalize pressure and prevent the valve from opening or closing, making this kit a critical troubleshooting asset.
Kit Specifications
- Valve Compatibility: Type 0281 / Type 0255.
- Orifice Size: DN 13 (13mm).
- Seal Material: NBR (Nitrile).
- Usage: Neutral media (Cold water, Compressed air).
- Contents: Diaphragm, Pilot plunger seal, O-rings, Springs.
Maintenance & Diagnostics
Lifecycle State: Active Spare. Diagnosis: If the valve hums but doesn’t open, the pilot port in the diaphragm might be clogged, or the diaphragm itself torn. Replacing the internals with kit 00041348 resolves both issues. Installation Advice: Torque the bonnet screws evenly in a diagonal pattern to avoiding pinching the new diaphragm edge. Do not use excessive grease; the NBR material is self-lubricating enough for water applications, and excess grease can clog the pilot orifice. Compatibility: Designed for standard brass or stainless steel bodies. Ideal for restoring valves in irrigation systems, car washes, and general machine automation.
| Metric | Value |
|---|---|
| Max Pressure | 16 bar |
| Temp Limit | +80°C |
| Media | Neutral fluids |
| Type | Servo-assisted repair |
Cost Efficiency
Replacing the wear parts with the 00041348 kit extends the valve’s operational life significantly, avoiding the need to cut pipes or re-thread connections required for a full valve replacement.
Cotizamos y enviamos esta pieza a cualquier parte del mundo. Contacte ahora.
